New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Dallas Homeowners Choose ECO Window Systems Windows & Doors
Meridian Windows and Doors Dallas provides independent Dallas Eco Window Systems service for windows and doors repair and replacement across the city, from postwar brick ranches in Casa View to newer builds in Far North Dallas. We are not an authorized ECO Window Systems dealer, and we do not pretend to be one. What we are is a local crew that has pulled apart enough ECO 3000 hung windows, ECO 5000 sliders, and ECO Impact Series units in North Texas heat to know exactly what fails, why it fails, and whether a repair will hold or a replacement makes more sense. If you own ECO Window Systems products in Dallas and need straight answers, call (325) 309-2639 and we will tell you what we would do if it were our house.
Why Trust Meridian Windows and Doors Dallas for Your ECO Window Systems Windows & Doors?
We have worked on ECO Window Systems products across North Texas long enough to know the hardware by feel. ECO 3000 tilt latches, ECO 5000 roller assemblies, ECO 7000 casement operators, ECO Impact Series interlayers. The difference between a tech who has handled these parts hundreds of times and one who is reading the manual is the difference between a 45-minute repair and a second visit that should not have been necessary. Elliot Vance, owner of Meridian Windows and Doors Dallas, learned the trade at Los Angeles Trade-Technical College and has spent nearly two decades installing and replacing windows and doors in the Dallas-Fort Worth area. He has worked on everything from Deep Ellum lofts to single-family homes in Oak Cliff, and he knows what a Texas summer does to a poorly sealed frame. Every ECO Window Systems job we take gets the same treatment: a written price before work starts, parts chosen for the specific failure, and a 365-day written guarantee. If the repair fails within that year, we come back at no charge. That is the whole deal.
Common ECO Window Systems Windows & Doors Problems We Fix in Dallas
We see the same failures repeatedly in Dallas, because the climate here punishes windows and doors in predictable ways. Here are the ECO Window Systems problems our techs address most often:
- ECO 3000 Series sash dropping when tilted for cleaning. The tilt-latch springs wear out. On ECO 3000 single and double hung windows, the small spring-loaded latches that hold the sash in place lose tension after a few thousand cycles, and the sash will not stay up when tilted inward. Homeowners sometimes assume the whole window needs replacing. It does not. We replace the tilt latches with OEM parts, and the sash holds like it should.
- ECO 5000 Series panels binding or jumping in the track. Dallas dust is fine enough to work into the aluminum roller tracks on ECO 5000 horizontal roller and 3-panel sliding windows. The nylon rollers flatten over time, especially in south-facing windows that bake all afternoon, and the panel starts dragging or skipping. We pull the panels, clean the tracks, replace the rollers, and realign everything. Slides like new.
- ECO Impact Series fogging or hazing between glass layers. ECO Impact Series windows use a laminated interlayer for impact resistance. When the edge seal fails at that interlayer, moisture creeps in and you get hazing or fogging while the sash itself stays structurally intact. This is a seal failure, not a glass break. In many cases the glass unit can be replaced without pulling the entire frame.
- ECO 7000 Series casement and awning crank stiffness and grinding. The operator gears on ECO 7000 casement, awning, and hopper windows wear down, especially when the window faces west and the metal operator gets heated and cooled repeatedly. If the crank grinds instead of turning smoothly, the gear teeth are usually stripped. We replace the operator assembly and lubricate the hinge points.
- Compressed weatherstripping causing air leaks and condensation. ECO casement and awning windows rely on compressible weatherstripping around the sash perimeter. After several Dallas summers, that gasket loses bounce and stays compressed. Air leaks in, condensation forms on the interior glass, and the AC bill creeps up. Replacing the weatherstripping restores the seal.
After a major hailstorm, we also check what insurance adjusters often miss: the window screens and exterior door thresholds. Dime-sized holes in screens let in mosquitoes and humid air. We flag it because nobody else does.
ECO Window Systems Parts & Our Repair-vs-Replace Approach
For critical ECO Window Systems hardware, tilt latches, rollers, sealing gaskets, and operator gears, we use OEM parts. The tolerances on aftermarket versions are close enough to look right and loose enough to bind. We will not install a part that is going to fail in 18 months and waste your time. For non-critical items like exterior trim or glazing bead, we may use quality aftermarket equivalents, and we will tell you when we do.
The repair-versus-replace call comes down to the frame. If the ECO frame is square, the welds are intact, and only the hardware or glass unit is failing, repair makes sense and we will say so. If the frame is warped from foundation movement, common in Dallas where expansive clay soil shifts under slab-on-grade homes, or the seal has failed across multiple sashes, we lay out the cost of a full-frame replacement against the cost of repeated repairs. We make the recommendation we would make to a relative. Call (325) 309-2639 and we will give you an honest read.
Our ECO Window Systems Service Process – Step by Step
Every ECO Window Systems job we run in Dallas follows the same four steps, and the price goes on paper before step one begins.
- 1
Diagnosis, on site. We inspect the window or door, identify the specific failure, and check for secondary issues. On an ECO 5000 slider with a binding panel, we check the roller condition, the track alignment, and the weep holes. On an ECO Impact Series unit with fogging, we check the seal condition and sash square.
- 2
Written quote, no surprises. We put the parts and labor on paper before any work starts. The price does not move at the door. If we find additional problems once the window is apart, we stop and call you before doing anything else.
- 3
Repair or installation. We complete the work with the right ECO Window Systems parts, test operation, clean the work area, and walk you through what we did. Our techs are background-checked and uniformed, so you know exactly who is in your home.
- 4
Testing and written warranty. We operate the window or door multiple times, check the seal and weatherstripping, and confirm the lock sets correctly. Then we hand you the 365-Day Done Right Promise in writing. If it fails within the year, we return at no charge.
Elliot has a rule that covers all of it: measure it right the first time, and the rest of the job takes care of itself.
ECO Window Systems Products We Service & Install in Dallas
We service and install the full ECO Window Systems lineup in Dallas. That covers the ECO 3000 Series single and double hung, ECO 5000 Series horizontal roller and 3-panel sliding windows, ECO 7000 Series casement, awning, and hopper units, and the ECO Impact Series of impact-resistant and hurricane windows. We also handle Window Replacement with ECO vinyl windows for homeowners replacing older single-pane units in 1950s and 1960s brick veneer homes. We keep common OEM hardware in local stock, tilt latches, rollers, gaskets, and operator assemblies, so most ECO repairs in Dallas are completed in a single visit.
We Also Service These Brands
ECO Window Systems is one of eight manufacturer lines we carry and service. If you have a mix of window brands in your Dallas home, which is common in older homes renovated at different times, we also work on PGT, CGI, CWS, and ES Windows products. One crew, one call, matched parts for each brand.
FAQs – ECO Window Systems Windows & Doors Service in Dallas
The tilt-latch springs are worn. ECO 3000 hung windows use a spring-loaded latch to hold the sash in the tilted position, and after years of use in Dallas heat, the spring tension goes. We replace the latches with OEM parts, usually both sides at once, and the sash holds at the proper cleaning angle again. It is a straightforward repair, not a window replacement.
In most cases, yes. The cloudiness is typically an interlayer edge seal failure, not a frame problem. We can replace the insulated glass unit, or the laminated glass assembly if the interlayer is compromised, and keep the existing frame intact. If the frame itself has moved or warped, which can happen on Dallas slab foundations, then a full Garland Eco Window Systems service style replacement may be the better call. We will show you both options and the prices before you decide. Call (325) 309-2639 to schedule a look.
OEM. ECO 5000 roller wheels are not a part we cut corners on. The aftermarket rollers we have tested do not seat properly in the aluminum track, and that causes the same binding problem you were trying to fix. We use genuine ECO Window Systems roller assemblies and install them on a cleaned, realigned track.
Almost always, yes. The operator gear inside the crank mechanism has stripped teeth, which is why it grinds instead of turning smoothly. Dallas heat accelerates the wear, especially on west-facing windows. We replace the operator assembly with an OEM part, lubricate the hinge points, and the crank turns with normal resistance again.
Yes. We can replace the sashes or the entire unit with ECO Impact Series glass while keeping the same frame profile and sightlines. This is a common request for Eco Window Systems in Cedar Hill and Dallas, where homeowners want impact resistance without reworking the exterior of a brick veneer home. It is a bigger job than a hardware repair, and we will give you a written price for the glass upgrade before any work begins.
Most ECO Window Systems hardware repairs in Dallas run between $145 and $380, depending on the part and how much disassembly is required. Roller replacement on an ECO 5000 slider is typically at the lower end; operator replacement on an ECO 7000 casement is typically mid-range. Replacing a failed glass unit on an ECO Impact Series window runs $350 to $700, depending on glass size and whether the frame needs work. Full-frame replacements run higher and we quote those job by job. Call (325) 309-2639 for a free estimate, it takes about 15 minutes, and the price goes on paper before you commit to anything.
Book Your ECO Window Systems Service in Dallas, TX
If your ECO Window Systems windows or doors need work in Dallas, call Meridian Windows and Doors Dallas at (325) 309-2639. We will schedule a time, send a background-checked tech, and give you a written price before any work starts. Free estimate, straight answers, and the whole job guaranteed in writing for 365 days.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Dallas since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.