New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Windows & Doors in Garland, TX | Meridian Windows and Doors Dallas
We provide independent ES Windows service across Garland, from Window Replacement - Garland and full-frame replacements to insert retrofits and impact-resistant upgrades. The one thing that makes our ES Windows work here different is this: we know the exact failure patterns on Garland’s mid-century homes, because we’ve repaired hundreds of them. Call (325) 309-2639 for a written estimate before any work starts.
We’re Meridian Windows and Doors Dallas. We service and install ES Windows product lines in Garland homes built from the 1960s through the 1990s, which means we see the same corroded weep holes, worn rollers, and failed seals week after week. That repetition builds real expertise. You can reach a live person at (325) 309-2639 any hour, any day, to schedule a free estimate for ES Windows sales & service.
Why Garland Residents Choose Us for ES Windows Service
Most window companies in Garland will take an ES Windows job, but few know the product line well enough to diagnose a 7000 Series weep hole failure before they even pull the sash. Our team does. Elliot Vance, our owner, grew up in the trades and has spent nearly two decades on Window Installation in Garland and replacing windows across the Dallas-Fort Worth area. He knows how a Texas summer, 100-degree heat baking a poorly sealed frame, will expose a bad install faster than any inspection.
We use OEM ES Windows parts whenever they’re available, especially for rollers, locks, and weatherstripping. Those components need exact fit and finish to operate correctly. When OEM isn’t available or the price doesn’t make sense, we’ll recommend a high-quality aftermarket alternative only for non-structural components, and we’ll tell you plainly if replacement is the smarter spend. Every job gets a written price before work begins and a written 365-Day Done Right Promise after it’s finished. If the work fails within that year, we return at no charge. That’s not a sales line. It’s in writing on every invoice we hand to a Garland homeowner.
Common ES Windows Windows & Doors Problems We Solve in Garland
- Corroded weep holes on 7000 Series aluminum frames. Garland’s hard water and spring thunderstorms work together on original 1970s aluminum units. The weep holes plug with corrosion, water pools inside the frame, and it finds its way to the sill. We see this most often in Duck Creek, where original 7000 Series single hungs are still common. We clean and repair the drainage path, then reseal the frame.
- Loose and failing rollers on 8700 Series horizontal sliders. Years of sliding in Garland’s heat and humidity wear out the roller assemblies. Panels get heavy, stick, jump track, and eventually let rainwater drip onto the sill during storms. We replace the rollers with OEM parts and realign the track so the panel glides and seals like it should.
- Degraded glazing tape on Impact Series units. Older ES Windows Impact Series windows in Garland sometimes develop intermittent fogging. The cause is usually degraded glazing tape around the insulated glass unit, not the glass itself. We reglaze and reseal the unit where it’s cost-effective, and we’ll tell you straight when a full replacement is the better long-term move.
- Broken tilt-latch springs on double hung units. Garage-level humidity and hard water in Garland accelerate metal fatigue on tilt-latch springs. A broken latch means the sash won’t tilt in for cleaning and can rattle in strong winds. We replace the springs and check the balance system while the sash is out.
- Undersized original frames that fail modern energy codes. Many 1960s and 1970s Garland homes were built with single-pane aluminum windows that don’t meet current energy standards. We can retrofit ES Windows inserts into existing openings, or do a full-frame replacement when the rough opening allows for a properly sized, code-compliant unit.
ES Windows Service in Garland: What Local Conditions Mean for Your Equipment
Here’s something specific to Garland that doesn’t apply the same way in Plano or Richardson. In Duck Creek alone, we’ve seen hundreds of original 1970s aluminum windows with weep holes so corroded by decades of hard water that they fail every spring thunderstorm. Not some of them. Most of the originals still in place. The pattern is so consistent that our techs spot it within minutes of arriving at a job: water staining on the interior sill, paint bubbling at the bottom corners, and a telltale white crust along the frame’s drainage channel.
What that means for an ES Windows owner in Garland is simple. If you have original 7000 Series aluminum frames, you should have the weep holes inspected before the spring storm season starts in March. A corroded weep hole is a small fix when caught early: we drill out the corrosion, restore the drainage path, and apply a corrosion inhibitor. Left alone, that same plugged hole sends water into the wall cavity every time it rains hard. By June, you’re looking at drywall repair on top of the window work. A meridian is a fixed line you measure everything against. That’s how we run every install: find the problem early, fix it right, write down what we did.
ES Windows Models & Products We Service in Garland
We service the full ES Windows residential line. That includes the 7000 Series single hung, the 8700 Series horizontal roller, Tilt-N-Turn casement and awning units, and the Impact Series that carries Miami-Dade approval. We also install all of them as replacements when repair doesn’t make financial sense.
For parts, we keep common ES Windows components in local stock: rollers, locks, weatherstripping, and balance mechanisms. That cuts turnaround time for most Garland repairs to a single visit. For less common parts, we order OEM and schedule the second visit when the part arrives. We’ll always tell you the timeline in writing before we start. If you’re replacing a full frame, we spec low-E glass (a thin coating that reflects heat while letting light through) appropriate for Garland’s hot summers and occasional hail.
ES Windows Service Pricing in Garland
Most ES Windows repairs in Garland run between $180 and $340 per window, depending on the part and the labor involved. Roller replacement on an 8700 Series slider typically falls at the lower end of that range. Reglazing a fogged Impact Series unit runs higher. Full-frame ES Windows replacement in Garland generally starts around $800-$1,200 per window installed, depending on size, glass package, and whether the opening needs structural work.
Insert window replacement, where the new unit fits into the existing frame, runs less than full frame. Impact-resistant glass adds cost. What doesn’t add cost is the estimate: it’s free, it’s written, and the number on the line item is the number you pay. No door-to-door markups. Call (325) 309-2639 to schedule a free estimate, and we’ll walk you through exactly what your ES Windows need and what it costs before you sign anything.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ES Windows Windows & Doors in Garland
Duck Creek homes were built when Garland’s water supply had a higher mineral content, and decades of that water running through the original aluminum frames leaves a hard crust of corrosion that plugs the weep holes. Spring thunderstorms then push water over the sill instead of through it. The fix is to restore the drainage path and apply a corrosion inhibitor, which we do as a standard repair. Call (325) 309-2639 for an exact quote, and we’ll inspect the weep holes while we’re there.
Yes, in most cases. We can replace the glass with a low-E insulated unit and rebuild the weatherstripping and rollers within the existing frame. That upgrades the thermal performance without a full-frame tear-out. If the frame itself is too corroded or undersized, we’ll tell you and price a full-frame ES Windows replacement instead. Call (325) 309-2639 and we’ll measure it right the first time, so the rest of the job takes care of itself.
Not necessarily. Fogging usually means the glazing tape around the insulated glass unit has degraded, which allows moisture between the panes. We can reglaze and reseal the unit where the frame is sound and the glass isn’t cracked. If the seal has failed entirely or the frame shows damage, replacement is the smarter spend, and we’ll quote both options in writing. Call (325) 309-2639 for a free estimate.
They hold up well when the seal and hardware are in good condition. The weak point we see on older Tilt-N-Turn units in Garland is the weatherstripping, which hardens and shrinks in the heat, leaving a small gap where wind-driven rain pushes through during hail storms. We replace the weatherstripping and check the multi-point locks, which keeps the sash tight. Call (325) 309-2639 and we’ll give you a written price to fix it.
It can, especially if you’re dealing with failed seals, rotted weatherstripping, or single-pane glass. Sealing the air leaks and upgrading to low-E insulated glass cuts the heat gain that drives your AC bill in July and August. A full-frame or insert retrofit delivers the biggest savings. Call (325) 309-2639 for a free estimate, and we’ll tell you honestly whether repair or replacement is the better dollar-for-dollar move.
Service Areas Near Garland
We serve Garland and the surrounding communities, including Garland service area coverage for the entire city. Our crew also works regularly in Dallas, Sachse, and nearby neighborhoods. If you’re in ES Windows service in Dallas or ES Windows service in Cedar Hill, we can schedule the same written estimate and the same 365-Day Done Right Promise.
Book Your ES Windows Service in Garland Today
Call (325) 309-2639 to schedule your free ES Windows estimate in Garland. A live person answers, every time, day or night. We’ll inspect your windows, give you a written price, and stand behind the work for 365 days.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Garland since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.