New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Dallas, TX | Meridian Windows and Doors Dallas
We provide independent Mr-Glass repair and replacement across Dallas, from single-pane 4700 single hungs in 1950s brick ranches to custom bronze-tinted sliders in Preston Hollow two-stories. The one thing that makes our Mr-Glass work different here is simple: we know what Dallas clay soil, hail, and 100-degree summers do to these specific frames and seals, because we see it every week. If you’re dealing with a binding sash, a fogged double-pane unit, or a screen full of hail holes, call (325) 309-2639 for a straight answer and a written estimate.
Why Dallas Residents Choose Us for Mr-Glass Service
We’ve worked on Mr-Glass windows and doors across Dallas long enough to know which models fail, how they fail, and whether a repair will actually hold up through the next storm season. Elliot Vance, our owner, learned the trade at Los Angeles Trade-Technical College and has spent the better part of two decades on Window Installation in Dallas and replacing windows and doors across the Dallas – Fort Worth area, from Deep Ellum lofts to single-family homes in Oak Cliff. He and the crew have pulled apart enough Mr-Glass 5100 double hungs to tell you in the first five minutes whether that rattle is a $40 glazing bead or a structural corner weld failure.
We’re an independent Mr-Glass service provider, not a manufacturer authorized dealer. That distinction matters. We don’t answer to a factory playbook, and we don’t push replacement when an OEM balance system and fresh weatherstripping will get your window working for another decade. When a part is warranty-critical, we source OEM Mr-Glass components. When it’s a discontinued line, we use proven aftermarket glass packs and hardware that spec correctly for the job. Call (325) 309-2639 and you’ll talk to a live person, not a voicemail loop.
Common Mr-Glass Windows & Doors Problems We Solve in Dallas
- UV-degraded glazing beads on 5100 double hungs. Dallas sun is relentless. The vinyl glazing bead on 5100 double hung units turns brittle after years of direct southern exposure, which lets the glass rattle in the frame and opens a path for humid July air to leak into the house. We replace the bead, reset the glass, and re-seal the unit.
- Hail-shattered tempered glass in 8600 horizontal sliders. A dime-sized impact crater from a spring hailstorm can sit in an 8600 slider for weeks before thermal stress turns it into a full crack across the pane. Because we see this pattern repeatedly in Dallas, we inspect beyond the obvious crack, checking screens and thresholds too. Our field teams have found screen holes and bent thresholds that insurance adjusters walked right past.
- Foundation movement torsioning 4700 single hung frames. Dallas sits on expansive clay soil that swells when it’s wet and shrinks in dry summers. That movement twists 4700 frames, breaking corner welds and jamming sashes so badly homeowners assume the whole window is shot. Often, the fix is re-shimming the frame and repairing the corner, not a full replacement.
- Warped hollow-core Mr-Glass entry doors in humid summers. A hollow-core Mr-Glass entry door slab will absorb moisture during Dallas’s humid stretch from June through September, warp, and throw the latch out of alignment. You’ll feel the gap at the threshold, and you’ll hear it whistle when the wind picks up. We replace the slab, reset the hinges, and adjust the threshold to close the gap.
- Corroded aluminum spacers in 1980s double-pane units. We’ll get to this one in detail below, but this is the failure nobody anticipates: moisture from clay-soil humidity cycles works into the spacer, corrosion starts, and the seal fails from the inside out.
Mr-Glass Service in Dallas: What Local Conditions Mean for Your Equipment
Here’s the thing about Dallas that no out-of-state manufacturer handbook ever covered. Homeowners with Mr-Glass windows installed in the 1980s, particularly in slab-on-grade brick veneer homes, often discover that the original aluminum spacers in their double-pane units have corroded from condensation driven by the same clay-soil moisture cycles that crack their foundations. The soil under the slab holds water after spring rains. That moisture migrates into the wall cavity, condenses against the cooler glass edge inside the frame, and sits against the aluminum spacer. Fast forward five to ten years and the spacer is pitted, the seal has failed, and the glass fogs from the inside. Manufacturers never anticipated this for slab-on-grade Dallas construction. We did, because we’ve replaced those units in neighborhoods across the city. When we see a fogged 5100 or 4700 in a postwar brick ranch, we don’t just replace the glass. We check the wall cavity for moisture, verify the frame is still square on its foundation, and write up exactly what we find before any work starts.
After a spring hailstorm a few seasons back, our techs inspected a Mr-Glass 8600 horizontal slider in Preston Hollow. The glass was cracked, which the homeowner expected. What they didn’t expect were three dime-sized holes in the screen and a bent threshold. We replaced the insulated glass unit, re-screened, and reset the frame on new shims to compensate for a 3/8-inch foundation drop, stopping the air whistle and mosquito leaks with one repair. Measure it right the first time, and the rest of the job takes care of itself.
Mr-Glass Models & Products We Service in Dallas
We service the full Mr-Glass window and door lineup that Dallas homeowners actually have: the 4700 Series Single Hung, 5100 Series Double Hung, 8600 Series Horizontal Slider, and 5700 Series Casement. For warranty-critical components like balance systems and weatherstripping, we prefer OEM Mr-Glass parts when they’re available. For older or discontinued lines, we turn to aftermarket glass packs and hardware that meet or exceed the original spec. We keep the most common Dallas-failure parts stocked locally, which means we’re not waiting a week on a glazing bead from a regional distributor. When it comes to window and door installation, we also handle insert window replacement, hurricane-proof front and entry doors, and single and double hung replacements with low-E glass, which is a thin coating that reflects heat while letting light through.
Mr-Glass Service Pricing in Dallas
Most Mr-Glass repairs in Dallas run between $150 and $450 depending on the part and the labor involved. Replacing an insulated glass unit in an 8600 slider typically lands between $300 and $700, with the higher end reserved for custom bronze tints or oversized units. For Window Replacement - Dallas on Mr-Glass models, including new low-E glazing and proper weather sealing, full-frame work generally starts around $800 per opening and goes up based on size, access, and whether we’re working around brick veneer set in mortar. A warped entry door slab replacement averages $400 to $900 installed. The price goes on paper before any work starts, in writing, and it does not move at the door. Every job is covered by our 365-Day Done Right Promise: if the work fails within a year, we return at no charge. Call (325) 309-2639 for a free estimate and a line-item quote you can actually read.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Dallas
The expansive clay soil under your foundation shrinks during extended dry heat, which drops the slab slightly and torques the frame. The sash then binds against the jamb. The fix is usually re-shimming the frame, not replacing the window. Call (325) 309-2639 and we’ll diagnose it in person during a free estimate.
Yes. Bronze-tinted glass was everywhere in Dallas during the 1980s building boom, and we regularly source custom insulated glass units with matching bronze tint for Mr-Glass frames. If the original spacer has corroded, we’ll replace the entire unit with a modern low-E interior that still carries the bronze exterior look. Call (325) 309-2639 for a match-and-quote on your specific window.
Standard Mr-Glass 8600 sliders use tempered glass, which can survive small hail but will crack under repeated direct impact from larger stones. If your Dallas home faces west or southwest, where most storm cells approach, impact-rated glass or a protective film is worth considering. In many cases, replacing the glass pack with a laminated impact unit is more cost-effective than replacing the entire frame. We’ll show you both options and the written price for each before you decide.
This is common in 1950s through 1980s Dallas construction, where the window frame is mortared directly into the brick opening. Extraction requires cutting the mortar joint cleanly so the brick stays intact. Our crew has done enough of these removals across Dallas brick ranches to know exactly how the old mortar will behave, and we protect the surrounding masonry throughout the job. Call (325) 309-2639 and we’ll assess whether your frames are candidates for insert replacement, which preserves the original brick work.
In Dallas, it’s usually both. The hollow-core Mr-Glass door slab absorbs summer humidity and warps, while the clay soil under the slab shifts with the same moisture cycle, moving the threshold slightly out of level. Together, they throw the latch out of alignment. We’ll check the slab for warp, check the foundation movement, then give you a written price for replacing the door, resetting the threshold, or both depending on what we find.
Service Areas Near Dallas
We work across Dallas and the surrounding cities, including Garland, Cedar Hill, Grand Prairie, DeSoto, and Sachse. If you’re in one of those areas and need Mr-Glass service, we’ll schedule the estimate the same way we do for Dallas proper: written price first, no surprises. For service outside Dallas proper, see our Mr-Glass service in Garland and Mr-Glass service in Cedar Hill pages. We also cover the broader Dallas service area, and you can see the full scope of our Mr-Glass sales & service work here.
Book Your Mr-Glass Service in Dallas Today
If your Mr-Glass windows or doors are rattling, fogging, binding, or leaking, call (325) 309-2639. We’ll schedule a free estimate, put the price on paper, and stand behind the work in writing for a full year. In many cases, we can have a technician at your Dallas home the same week.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Dallas since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.