New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Patio Door Installation in Dallas: What to Know First
PGT patio door installation in Dallas typically runs $1,800 to $4,600 depending on door width, glass package, and whether the existing frame is salvageable. We’re Meridian Windows and Doors Dallas, an independent PGT service provider, and we install and replace PGT patio doors across the metro with most jobs completed in one day. Our price goes on paper before work starts, and it stays there. No change orders mid-install, no surprise line items at the end.
This page is for homeowners in Dallas who own a PGT sliding glass door or French patio door and need it measured, ordered, installed, or replaced correctly. If you’ve had a bad contractor experience before, the phone number to call is (325) 309-2639.
Key takeaways:
- PGT patio door installation in Dallas costs $1,800 – $4,600 for most homes.
- Most single-door installs are finished in one day, including cleanup.
- We’re an independent service provider, not PGT Corporate or a PGT factory rep.
- The price is written down before work begins and does not move at the door.
- Every install is covered by our 365-Day Done Right Promise in writing.
How PGT Products Fail – and How We Fix Them
PGT builds a solid door, but Dallas conditions have a way of finding the weak points. Here’s what we see most often when homeowners call us for patio door installation or replacement:
- PGT 5500 and 7700 sliding glass door rollers binding on worn tracks. The heat and fine dust in Dallas is hard on these roller assemblies. When rollers flatten out, the door drags, the handle torque spikes, and the top rail gets chewed up because people force it. We replace the rollers with OEM-spec parts and adjust the reveal so the door rides level. Ignore a dragging door for six months, and you’re usually looking at a track replacement too.
- PGT WinGuard patio door glass seal failure along the bottom edge. WinGuard is an impact-rated patio door built for coastal code. It does fine here, but when a seal fails and fog forms between the panes, it’s not a cleaning issue, it’s a pressure-seal failure. No amount of wiping the glass fixes it. We remove the sash, replace the insulated glass unit, and re-set the glazing so the seal isn’t stressed again.
- PGT 4600 and 5500 multi-point lock hardware falling out of alignment. French doors settle with foundation movement, and Dallas is no stranger to clay soil shifting under a slab. When the keepers drift, the door binds against the side jamb and the lock stops throwing cleanly. We pull the door, shim the jamb back to plumb, and re-mortise the keepers. The door should lock one-handed when we leave.
- Water infiltration at the threshold on PGT door installs done by other crews. This is the most common one we correct. A patio door installed without proper sill flashing or with a cold joint on the pan pan will leak during heavy North Texas rain. PGT doors are not leak-prone by design. They leak because they’re installed wrong. We pull the door, flash the rough opening correctly, set the door on a slope-trimmed pan, and test with water before we call it done.
- PGT 2200 patio door screen track damage from pet claws and weather. The screen track on the 2200 series is a hairline extrusion. It takes a beating. Once it’s bent or snapped, the screen binds and the door looks shot even though the glass is fine. We replace just the track extrusion and re-roll the screen with the correct spline. A lot of companies will tell you the whole door needs to go. It doesn’t.
Our PGT Patio Door Installation Process
Here’s how a PGT replacement goes when you call Meridian Windows and Doors Dallas. This is the same order of operations Elliot Vance has run on every install since we started:
- 1
Call and live person. You call (325) 309-2639. A person answers, every time. You describe the door, the problem, and the home. We schedule a visit.
- 2
Measurement and diagnostic. We come out, measure the rough opening and door twice, and inspect the frame, threshold, and existing hardware. If the door can be repaired instead of replaced, we tell you that first and show you the numbers both ways.
- 3
Written price. The full price goes on paper before any work starts. That’s the number. It does not move at the door.
- 4
Parts decision. We confirm whether OEM PGT parts or a quality aftermarket equivalent makes sense for the job. If it’s a warranty-adjacent item, we tell you what specs matter and why.
- 5
Install and test. We set the door, flash the opening, caulk, and trim, then run it through full open-close cycles, lock engagement, and a water test on the threshold. If the crew sees a gap or a bind, they fix it before leaving.
- 6
Cleanup and walkthrough. We haul the old door and packaging. Then we walk the door with you, show you the hardware, and hand you the written 365-Day Done Right Promise.
What PGT Patio Door Installation Costs in Dallas
Here are straight numbers for the most common PGT patio door installation scenarios we see in Dallas:
| Job | Typical Dallas Price |
|---|---|
| PGT 5500 sliding door roller and track replacement | $280 – $520 |
| PGT sealed glass unit replacement (single sash) | $390 – $750 |
| PGT 2200 screen track and screen replacement | $160 – $310 |
| Full PGT sliding door install with new door | $1,900 – $3,400 |
| PGT WinGuard impact-rated patio door install | $3,200 – $5,800 |
What moves the price: door width, impact-rated glass, whether the rough opening needs re-framing, and disposal of the old door. A straight swap with a good existing frame lands in the lower half of each range. Call (325) 309-2639 for a written quote. Estimates are free.
Why Dallas Homeowners Call Meridian Windows and Doors Dallas for PGT Work
We’re part of the Garrison Partners family, operating to The Garrison Standard since 2009. That’s not a slogan. It means every job gets a written price, a written guarantee, and a crew that shows up in uniform with a background check on file. If we make a mistake, we come back at no charge, no arguing.
PGT is one of eight manufacturer lines we work with. When a PGT replacement isn’t the right money for the job, we’ll say so and show you the CGI, CWS, ES Windows, or ECO Window Systems equivalent with the numbers side by side. We’re not married to any one brand, which means the door that goes in your house is the right one for your house, not the one sitting in our warehouse.
A meridian is a fixed line you measure everything against. That’s what the name means and how we run every install. Measure it right the first time, and the rest of the job takes care of itself.
FAQs
No. PGT’s product warranty covers manufacturing defects in the door itself, regardless of who installs it. What matters is that the installation doesn’t damage the door or the frame. We follow manufacturer specs because we want the door to perform, not because PGT pays us. If a door has an active manufacturing claim, we’ll document the defect so you can pursue it with PGT directly while we fix the install problem.
Yes. PGT has strong distribution in Texas, and we keep common roller assemblies, lock hardware, screen spline, and threshold profiles in stock for the series we most often work on. If a part needs to ship, it’s usually 3 to 5 business days. We’ll tell you the lead time before you agree to any work.
Most single-door installs are done in one day. A full frame replacement or an impact-rated WinGuard installation can take two days depending on the opening condition. We give you a straight timeline on the written estimate and stick to it. If we’re going to be late, you’ll hear it from us before the day runs out.
It depends on the frame and glass condition. If the frame is square, the glass seals are holding, and the problem is rollers, track, or hardware, a repair usually makes more sense and costs $300 – $700. If the glass is fogged in multiple sashes, the frame is rotted or twisted, or the door is under 20 years old and failing in multiple places, replacement is often cheaper over five years. We’ll show you both numbers and let you decide. Call (325) 309-2639 for our read on the door.
No. The price on the written estimate is the price you pay. The only time that number changes is if we find something behind the wall that no reasonable person could have predicted, and if we do, we stop and show you before we do anything. We do not surprise homeowners at the end.
Ready to get your PGT patio door installed correctly? Call Meridian Windows and Doors Dallas at (325) 309-2639 for a free, written estimate. A live person answers, and the price goes on paper before any work begins.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.