VLX 80 Casement Window

VLX 80 Casement Window in Dallas, TX | Meridian Windows and Doors Dallas

The VLX 80 Casement Window is a side-hinged aluminum window built around a simple idea: more glass, less frame. With ultra-narrow sightlines, it opens fully outward to catch every Dallas breeze, and the 0.079-inch wall thickness gives it structural strength that far lighter vinyl frames can’t match. Homeowners across Dallas choose this window for modern builds, mid-century renovations, and any room where a wide, unobstructed view matters. Meridian Windows and Doors Dallas is an authorized ViewLux installation partner, which means you get factory-backed product support and a local team that handles measurement, installation, and warranty service. Call (325) 309-2639 for a free project estimate.

Call (325) 309-2639

Product Overview – VLX 80 Casement Window

The VLX 80 is designed for homeowners who want a window that performs like a piece of engineering, not just a hole in the wall. Casement windows hinge at the side and crank outward, which makes them the best choice for ventilation because the entire sash opens, unlike a sliding window that only opens halfway. In Dallas, where spring and fall evenings are perfect for natural airflow, a casement window earns its keep fast.

The 1.97-inch profile width is the story here. That is a slim frame by aluminum standards, and it is what gives the VLX 80 its signature look: a near-edge-to-edge glass plane that works beautifully in contemporary homes in Uptown, White Rock, and Preston Hollow, while still fitting classic brick ranch styles in Richardson and Garland when finished in the right color. The aluminum construction means the frame won’t warp, rot, or sag over decades of Texas heat and humidity.

We recommend the VLX 80 most often for kitchens over sinks, living rooms facing a backyard, and any wall where the view is the point. Because the sash seals tightly against the frame on all four sides when closed, it also outperforms sliding windows on air leakage, which translates to lower cooling bills through Dallas summers.

Technical Specifications

Every dimension and option on the VLX 80 is chosen to maximize glass area while keeping the frame rigid enough to hold a sealed insulated glass unit perfectly flat for decades. Here is what the series offers:

• Wall thickness: 0.079 inches, the backbone of the frame’s structural stiffness
• Profile width: 1.97 inches, a slim frame that maximizes visible glass
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Sill options: Standard Sill, Low-Profile Sill
• Thermal performance: NFRC-rated thermal break technology in every frame
• Installation standard: AAMA 2400/2410 compliant installation by Meridian Windows and Doors Dallas
• Sealing: AAMA 812 low-expansion foam on all perimeter joints
• Impact option: Impact-resistant laminated glass available for storm and security zones

That 0.079-inch wall thickness matters more than most people realize. It is what lets the frame carry a heavy double-pane insulated unit without bowing, which is what keeps the weather seal tight year after year in Dallas heat.

Performance Features

Thermal Efficiency
The VLX 80 uses a thermal break that separates the interior and exterior aluminum faces, cutting heat transfer through the frame itself. Combined with Low-E glass, this is an NFRC-rated system that keeps Dallas air conditioning inside during August and heat inside during February. The frame is not the weak point in your wall anymore.

Acoustic Performance
Aluminum is dense by nature, and when you pair a rigid frame with laminated glass, you get real sound reduction. Homeowners near I-35, the Dallas North Tollway, or under the flight path into Love Field notice the difference immediately. Laminated glass is the single biggest upgrade for noise control in this series.

Airtightness & Weather Seal
Casement windows seal tighter than any other operable window type because the sash compresses against the frame on all four sides when closed. On the VLX 80, that compression seal is engineered to stay consistent over decades of opening and closing cycles, which is why air leakage ratings on this series outperform typical sliders and double-hungs in Dallas homes.

Waterproofing
Every VLX 80 we install in Dallas gets a full AAMA 812 low-expansion foam seal on all perimeter joints. That foam does two jobs: it seals the gap between the window frame and the rough opening so water never gets behind the frame, and it eliminates the air leaks that cause drafts and condensation around window edges.

Wind Resistance
Dallas sits at the edge of Tornado Alley, and spring storm season brings straight-line winds that routinely test window frames. The VLX 80 is wind-load rated for local climate requirements, which means the frame, hardware, and glass package are all tested to hold up under the pressure loads this region experiences. Impact-rated laminated glass is available if you want an extra layer of storm protection.

Security & Hardware
The VLX 80 uses multi-point locking hardware that engages at several points along the frame, not just a single latch. That makes the window extremely difficult to pry open from outside. When paired with tempered or laminated glass, the window becomes a genuine deterrent, not just a barrier. Dallas homeowners in ground-floor bedrooms and back-facing rooms ask about this often.

Color & Glass Options

Six finish options means you don’t have to compromise the exterior look of your Dallas home. Premium Black is the most requested finish we install in modern and transitional builds, especially in East Dallas and Oak Cliff, where black window frames against brick or stucco read clean and architectural. Pure White suits traditional suburban homes in Plano, Frisco, and Allen. Anodized Silver is a commercial-grade finish that works well on mid-century and industrial-style homes. Bronze and Champagne carry warmth, pairing nicely with stone exteriors. Teak Wood gives you the look of wood grain without the maintenance, a fit for ranch-style homes where wood windows would have been original.

On the glass side, Clear is the budget-conscious baseline. Low-E is what we recommend to every Dallas homeowner, because it reflects infrared heat and keeps cooling costs down. Frosted glass is ideal for bathrooms and side yards where you want light but not sightlines. Tempered glass meets code for windows near doors and low to the floor. Laminated glass is the upgrade for noise reduction and impact resistance, and it holds together if broken, which is a real safety advantage in a home with children.

Installation by Meridian Windows and Doors Dallas in Dallas

The best window on the market means nothing if it is installed wrong. We have seen it too many times in Dallas: a premium window set into an unlevel opening, sealed with whatever caulk was in the truck, and leaking within a year. Improper installation not only fails, it voids the manufacturer warranty, so the homeowner is left holding the bag on a product they paid good money for.

Here is how we do it. Every VLX 80 installation in Dallas starts with a pre-install inspection of the rough opening. We check for rot, shifted framing, and out-of-square conditions before the window ever leaves our truck. Then we set the window level, plumb, and square. That is not optional language; it is the standard we measure against. After the unit is anchored, we apply AAMA 812 low-expansion foam to all perimeter joints and seal the exterior to AAMA 2400/2410 installation standards. Before we walk away, we run a final water test on the exterior and inspect the interior trim for any gaps. Cleanup happens the same day, and we haul off the old window.

Dallas brings its own installation considerations. The clay soils under North Texas foundations shift, and that movement can transfer to wall openings over time. We account for that in how we anchor and seal, so a window installed correctly today stays square and sealed through years of soil movement and thermal expansion. You don’t get that level of care from a big-box subcontractor.

Frequently Asked Questions – VLX 80 Casement Window

Get a Quote – VLX 80 Casement Window in Dallas

If you are ready to see the VLX 80 in person or want a firm number for your project, call Meridian Windows and Doors Dallas at (325) 309-2639. We offer free on-site measurements and written, line-item quotes with no change orders. Whether you are replacing one window or outfitting a whole house in Dallas, we will walk you through the options and get it ordered.

Written by the team at Meridian Windows and Doors Dallas, authorized ViewLux installation partner serving Dallas, TX.