New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Window Installation: The Dallas Owner’s Guide
We install and replace CWS window units across Dallas, with most single-unit CWS installations running between $550 and $1,450 installed depending on size, glass package, and frame condition. If you have a CWS window with a failed seal, a cracked sash, or hardware that no longer locks, we can match the replacement and get it installed, usually within a few days of your call. The most common way Dallas homeowners find us is a window that suddenly fogs between the panes or a crank that spins without moving the sash. You don’t need to know the exact part number before calling. We’ll identify it on site.
Meridian Windows and Doors Dallas is an independent service provider, not affiliated with CWS. We stock and install CWS-compatible parts because CWS has a strong footprint in Texas and we see their units regularly, from older single-hung models in Richardson to newer impact-rated casements in Plano and Allen.
Which CWS Models This Applies To
CWS manufactures several window families, and parts are not interchangeable across all of them. The main lines we service in Dallas are the CWS 600 Series single-hung, the 700 Series casement and awning, and the Targa Series impact windows common in newer construction north of the city. The biggest compatibility gotcha with CWS is the balance system: 600 Series windows built before roughly 2014 use a coil balance with a 1/2-inch shoe, while later units switched to a 9/16-inch shoe. They look nearly identical, but putting the wrong shoe in means the sash will not stay up. We check the stamp on the existing balance before ordering anything.
If you’re replacing a full sash rather than just hardware, the glass package matters. CWS offers clear, low-E, and impact-rated glass, and in Dallas, the low-E coating (a thin layer that reflects heat while letting light through) is worth the upgrade. A west-facing CWS window with clear glass in August becomes a radiator. We’ll match your existing unit’s glass type unless you want to upgrade, and we’ll show you the price difference on paper before any work starts.
When an OEM CWS part makes sense, we order it. When a quality aftermarket equivalent matches the spec and saves you 20 to 30 percent, we tell you that too, and you decide. Either way, the price is written down before we begin.
Key Takeaways
- Dallas CWS window installation typically runs $550 to $1,450 per unit, all-in with labor.
- CWS balance shoes changed size around 2014; a mismatched shoe won’t hold the sash.
- We stock common CWS hardware on the truck and order specialty parts direct.
- Every install carries our written 365-Day Done Right Promise.
- Call (325) 309-2639 for a free, no-pressure estimate.
Signs Your CWS Window Installation Is Failing
- Fog between the panes. The seal on the insulated glass unit has failed. Moisture gets in, condenses, and the window permanently loses clarity. The fix is a new IGU, not a cleaning.
- A sash that won’t stay up. The coil balance has lost tension or the shoe snapped. One side usually fails first, leaving the window lopsided and hard to operate.
- A crank that spins freely. On casement windows, the operator gear strips after years of use, especially when the window is opened against Dallas wind. The handle turns but the sash doesn’t move.
- Water staining on the interior sill. The frame or glazing bead has a leak. In Dallas, heavy spring storms will find the weak point fast. Left alone, this becomes rot and mold.
- A lock that no longer engages. CWS lock mechanisms wear, especially on single-hung windows where the keeper becomes misaligned from years of swelling and contracting in Texas temperature swings. A window that doesn’t lock is a security issue, not just a convenience one.
Replacement Cost & What’s Included
Here’s what CWS window installation costs in Dallas, based on the jobs we do most often:
| Job Type | Installed Price Range |
|---|---|
| Single sash replacement (glass + frame insert) | $550 – $850 |
| Full window replacement, standard size | $700 – $1,100 |
| Impact-rated CWS unit, standard size | $950 – $1,450 |
| Hardware-only repair (balance, lock, operator) | $120 – $260 |
Every line item is separated: part cost, labor, and any trim or caulking. You see the full number before we start. The work is covered in writing for 365 days. If the installation fails within that year, we return at no charge. That’s not a sales line. It’s in the paperwork.
DIY or Call Us?
You can safely do two things before calling: note the CWS label location (usually on the top sash or frame edge) and take photos of the failed part. That saves time. What you should not attempt yourself is removing a coil balance under tension. A CWS balance spring carries enough energy to break a finger if it releases wrong. We also don’t recommend re-glazing or replacing an IGU yourself. The vacuum seal and argon fill require a manufacturer-grade process. One bad bead of sealant means the window fogs again in six months.
If the window is cracked, fogged, or hardware has failed, call (325) 309-2639 and we’ll come look at it. The estimate is free, and there’s no pressure to commit the same day.
FAQs
CWS windows typically last 20 to 30 years in Dallas, but the seal on the insulated glass unit often fails at the 10 to 15 year mark in this climate. The 100-degree days followed by 40-degree nights create constant expansion and contraction, which stresses the seal more than milder climates do.
The glass unit itself can’t be repaired, but you don’t necessarily need a whole new window. On most CWS windows, only the insulated glass unit gets replaced, which runs $250 to $500 installed depending on size. If the frame is damaged or you want to upgrade to low-E, we replace the full sash. Call (325) 309-2639 and we’ll tell you which route makes sense for your window.
A single CWS window replacement takes 90 minutes to 2 hours from start to cleanup. If we’re replacing multiple windows or a full frame with trim work, plan on a half day to a full day. We’ll give you a straight time estimate when we quote the job.
We carry common CWS hardware on the truck: balance shoes, coil springs, locks, and crank operators. For full sashes and impact-rated glass units, we order direct and installation is usually scheduled within 3 to 5 business days in the Dallas area.
Written by Elliot Vance, Owner, Meridian Windows and Doors Dallas at Meridian Windows and Doors Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.