New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Replacement: The Dallas Owner’s Guide
We stock and install ECO Window Systems-compatible replacement windows throughout Dallas, with most single-unit replacements running $450 – $900 installed depending on glass package and frame condition. We keep common ECO sashes, balances, and insulated glass units on our trucks, so many jobs are done in one visit. You’ll usually know something’s wrong when a sash won’t stay up, condensation builds between the panes, or you feel a draft even with the window locked. Texas heat does not forgive a failed seal. Elliot Vance has replaced enough ECO units across Dallas to tell you exactly what you’re looking at by the time you finish reading.
Meridian Windows and Doors Dallas is an independent service provider. We are not affiliated with ECO Window Systems, but we’ve installed and replaced their products long enough to know their quirks, their measurements, and what fails first in this climate.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds vinyl windows in a few distinct series, and the replacement part has to match the series or the reveal won’t line up and the weatherstripping won’t seat. The ECO 3000 series uses a block-and-tackle balance with a 9/16-inch shoe; the ECO 5000 series steps up to a constant-force coil balance and a thicker mainframe. If you order the wrong balance, the sash either won’t lift or it’ll slam shut on its own. Pull the sash out and check the stamp on the metal balance channel or the corner of the glass spacer, it’ll have a series code and a date. Take a photo of that stamp before you call anyone. It saves a return trip.
On the glass side, ECO double-hungs in Dallas commonly ship with a 7/8-inch insulated glass unit, low-E coated, argon-filled. Aftermarket IGUs are fine if the spacer matches and the overall thickness is right within a sixteenth. But the ECO frame’s glazing bead profile is specific, so we spec OEM or a known-compatible extrusion, not whatever the supplier has on the shelf. We also work with PGT, CGI, and CWS products, so if your ECO window is in a room you’re rethinking entirely, we can quote the full replacement against the part repair and let the numbers decide.
Signs Your ECO Window Systems Window Replacement Is Failing
- A sash falls or won’t stay open. The block-and-tackle or constant-force balance has lost tension or a pivot bar snapped. This is the most common ECO failure we see in Dallas, and it’s usually a twenty-minute fix with the right part in hand.
- Condensation or fog between the panes. The spacer seal has failed and argon has escaped. The glass unit can’t be resealed; it gets replaced as a full IGU. Once the seal fails, the low-E coating starts degrading within a season.
- Crank operator on an ECO casement spins without moving the sash. The gear mechanism strips, especially on south-facing windows where the sun bakes the operator housing all afternoon. Replacement operator and arm kits are straightforward if the hinge track isn’t bent.
- A draft that doesn’t go away after locking. The weatherstripping along the meeting rail or sill has compressed or torn, or the frame has racked slightly out of square from settling. A new seal helps if the frame is sound; if the frame moved, the sash needs a full adjustment or replacement.
- Visible cracking or bowing in the vinyl frame corner. Dallas UV and heat cycles make old vinyl brittle. A weld seam that splits at the corner can’t be glued back. That’s a full sash or full unit replacement, not a repair.
Replacement Cost & What’s Included
In Dallas, an ECO Window Systems-compatible glass unit replacement runs $220 – $400 installed for a standard double-hung. A full sash with balance and weatherstripping sits at $300 – $550. A complete window replacement, frame and all, lands between $450 and $900 per unit installed, depending on size, glass package, and whether exterior trim or interior stops need work. The written price we give you before any work starts covers the part, labor, glazing, caulk if needed, cleanup, and disposal of the old unit. It does not move at the door.
Every replacement carries our 365-Day Done Right Promise in writing. If the installation fails inside a year, we come back at no charge. That’s the whole term, no fine print about labor exclusions. We also pull permits where the city requires them and we sit with the inspection until it passes.
DIY or Call Us?
You can replace weatherstripping yourself if you’re careful and the frame is square. You can clean the tracks and check that the lock is engaging. Anything involving removing a sash, replacing a balance, or pulling a glass unit is a different animal. The balance is under tension; get your hand in the wrong place and the shoe can take a chunk out of a finger. Glass units in ECO frames are glazed tight, and forcing the bead out can crack the new unit before it’s seated. Elliot’s standing rule applies here: measure it right the first time, and the rest of the job takes care of itself. If you’re not certain of the series or the measurements, call us at (325) 309-2639 and we’ll walk you through what to look for before you spend a dollar.
FAQs
Plan on 12 to 18 years for the glass seal in a Dallas climate, because the thermal cycling between 100-degree days and air-conditioned nights flexes the spacer and eventually cracks it. The vinyl frame itself can go 20 to 25 years if it was installed square and the drainage channels stay clear. A window with failed seals but a sound frame is a candidate for glass replacement, not a full tear-out. Call (325) 309-2639 and we’ll tell you honestly which one you need.
Yes, in most cases. A failed balance, a stripped operator, a torn weatherstrip, or a fogged glass unit can all be replaced as individual parts without pulling the whole frame. The exception is a cracked weld seam or a racked frame, which usually means a full unit. We stock the common ECO parts on our trucks, so the repair is often done the same day we diagnose it. Call (325) 309-2639 for a free estimate and we’ll tell you exactly which route applies.
A glass unit or sash replacement on a standard double-hung runs 45 minutes to 90 minutes on site. A full window replacement with frame work and trim runs two to four hours per opening, depending on access and what we find once the old unit comes out. We tell you the schedule before we start, and the written price covers the whole job, not just the first hour. Call (325) 309-2639 and we’ll give you a realistic window, not a sales promise.
We keep ECO 3000 and 5000 series balances, pivot bars, weatherstripping, and standard low-E IGUs on our service trucks, so most part replacements are a one-visit job. Oddball sizes and specialty glass get ordered with a lead time of four to ten business days. Call (325) 309-2639 and tell us the series code stamped on the balance channel or spacer, and we’ll confirm stock before you schedule.
Written by Elliot Vance, Owner, Meridian Windows and Doors Dallas at Meridian Windows and Doors Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.