New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Installation: The Dallas Owner’s Guide
We replace and install Mr-Glass windows across Dallas, and the typical installed price for a single Mr-Glass window runs $650 to $1,400 depending on size, frame material, and glass package. That includes the window, labor, and haul-away. Most owners call us when they notice a draft, condensation between the panes, or a sash that won’t stay up, and in Dallas we see the same failure pattern every summer: the seal breaks, argon leaks out, and the glass fogs. If you’re seeing any of that, we can get the right Mr-Glass replacement ordered and installed without you having to explain your window to three different people.
Key takeaways:
- Mr-Glass replacement windows installed in Dallas run $650 – $1,400 per window, parts and labor included.
- We stock Mr-Glass-compatible hardware on the truck and order OEM glass kits when the model calls for it.
- The 365-Day Done Right Promise covers every installation in writing. If it fails within a year, we return at no charge.
- Meridian Windows and Doors Dallas is an independent installer, not affiliated with Mr-Glass. We install their product because it’s a solid mid-range line, and we know its quirks.
Which Mr-Glass Models This Applies To
Mr-Glass builds four window lines that show up regularly in Dallas homes: the 1000 Series single-hung and slider, the 2000 Series double-hung, the 3000 Series casement and awning, and the 4000 Series picture and fixed units. The 1000 and 2000 lines share the same sash hardware, so a double-hung sash from a 2000 will often fit a 1000 frame, but the 3000 Series uses a completely different hinge and locking mechanism. That’s the compatibility mistake we see most: a homeowner orders a 2000 Series sash because it looks identical, then finds the lock bore doesn’t line up.
The part you need depends on what failed. If the glass is fogged, the fix is a new IGU, insulated glass unit, which is the sealed glass sandwich inside the frame. If the sash won’t stay up, it’s usually the balance system, and Mr-Glass uses a coil-balance setup on most 2000 Series double-hungs built after 2015. If the window won’t lock, it’s the lock keeper or the cam. The label matters: pull the sash out carefully and look for the etched code on the glass corner or the sticker on the frame’s top rail. That code tells us the exact glass dimensions, spacer type, and whether it was built with low-E coating. Bring us that code when you call, and we can price the replacement before we send a truck.
Some online sellers push generic aftermarket glass kits for Mr-Glass frames. We’ve installed enough of them to know the truth: an aftermarket IGU can work if the spacer width and glass thickness are matched exactly, but you give up the original gas fill and coating spec. For most Dallas homeowners, the better call is OEM Mr-Glass replacement glass or a matched aftermarket unit from a supplier we’ve vetted across dozens of installs. We’ll give you both prices and let you choose, because the number should be on paper before the work starts.
Signs Your Mr-Glass Window Installation Is Failing
- Fog or haze between the panes. The seal on the IGU has failed. Once argon escapes, the two panes start trapping moisture, and there’s no cleaning it. The glass has to be replaced.
- A draft you can feel at the frame on a cold North Texas morning. The weatherstripping has compressed or torn, or the original installer left a gap at the sill that caulk has since cracked away from. This is the most common call we get in Oak Cliff homes built in the 1980s and 1990s.
- The sash drops or slams when you let go. The coil balance has snapped or lost tension. Mr-Glass double-hungs before 2015 used a block-and-tackle balance, and those wear out in 10 to 15 years under daily use.
- A lock that won’t engage or catches hard. The frame has shifted, usually because the original install didn’t shim the corners tight, or the keeper has bent. A window that doesn’t lock is a security issue and a school-security liability on ground-floor rooms.
- Water stains at the lower corners of the interior drywall or on the window stool. The flashing or the sill pan has failed. In Dallas, our May and October storms test every weak flashing job, and the failure shows up as a brown line first, then a soft spot, then rot.
Replacement Cost & What’s Included
| Scope | Cost Range in Dallas |
|---|---|
| Single Mr-Glass IGU (glass only, standard size) | $280 – $550 installed |
| Single Mr-Glass window, full unit replacement | $650 – $1,400 installed |
| Balance or hardware replacement on one sash | $140 – $260 installed |
| Weatherstripping and reseal on one window | $120 – $240 installed |
What drives the range is size and glass package. A small 1000 Series slider with no low-E runs the bottom of the range. A big 4000 Series picture window with argon fill and low-E coating runs the top. The price we quote includes the part, labor, standard white or almond finish trim work, and haul-away of the old unit. We put the number in writing before any work starts, and that number does not change at the door.
Every Mr-Glass window we install is covered by the 365-Day Done Right Promise, a written guarantee that applies to labor and installation quality for a full year. If the window leaks, binds, or the trim separates within that time, we come back and fix it at no charge, no labor-exclusion fine print. The Mr-Glass manufacturer warranty on the glass and frame runs separately and we’ll register it for you at the install.
DIY or Call Us?
What you can safely do yourself: read the glass etch code we mentioned earlier, wipe down the track with a dry rag, and check whether the weep holes at the bottom of the frame are blocked with dirt or old caulk. That’s honest maintenance, and it solves a surprising number of “leaky” complaints that are really just clogged drainage. What you shouldn’t do is try to replace an IGU or a coil balance without the right tools. A coil balance under tension can take a finger off if it lets go wrong, and an IGU that’s even an eighth-inch off spec will bind the sash and ruin the new seal within a season. That’s not scare talk, it’s a reality we’ve cleaned up after on more than one occasion. If you’re unsure what’s failed, call (325) 309-2639, describe what the window is doing, and one of us will tell you over the phone whether it’s worth a service visit.
FAQs
Expect 15 to 25 years from the frame and 10 to 20 years from the IGU seal, and Dallas heat shortens that range by 3 to 5 years compared to milder climates. The seal fails faster on south and west-facing walls that take direct afternoon sun in July and August, especially in places like Plano and Frisco where there’s no shade at the alley line. Call (325) 309-2639 if you want us to inspect your windows and tell you which units are near end of life.
Yes, a failed IGU can be replaced without replacing the whole frame, and that’s usually the right call if the frame is sound and the window is under 15 years old. If the frame is rotted at the corners or the original install was sloppy, we’ll tell you honestly that a full replacement saves money long-term. We’ll price both options at the visit.
A standard single-window swap takes 90 minutes to 2 hours once we’re on site, and an IGU-only replacement takes about 45 minutes. If we’re doing a full house of 10 or more windows, we usually schedule two days. We’ll give you a written timeline with the quote.
We keep common Mr-Glass balances, locks, and weatherstripping kits in the truck, and we order IGUs and full units to spec from our Dallas supplier network. Most replacement glass arrives in 5 to 10 business days. If you need a hardware-only fix, we can often handle that same visit, so call (325) 309-2639 first and give us the window’s label code.
Get the Right Mr-Glass Window, Priced in Writing
If you’ve got a Mr-Glass window that’s fogged, drafty, or refusing to stay open, call (325) 309-2639 and ask for Elliot. We’ll help you identify the exact part, give you a written price that won’t move, and schedule the install around your life, not ours. The measure gets checked twice, the price goes on paper before the first screw turns, and the work is covered in writing for 365 days. That’s the Garrison Standard, and it applies to every window we touch in Dallas.
Written by Elliot Vance, Owner, Meridian Windows and Doors Dallas at Meridian Windows and Doors Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.