New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Casement Windows in Dallas, TX
Casement windows are hinged at the side and crank outward, sealing tight against the frame when closed. In Dallas, where summer heat and spring storms put real pressure on your home’s envelope, that tight seal matters more than most homeowners realize. Meridian Windows and Doors Dallas installs and replaces casement windows with written pricing before any work starts and a 365-day guarantee behind every unit we set. If you’re weighing casement versus double-hung or slider windows, call us at (325) 309-2639 and we’ll give you the straight comparison, not a sales pitch.
This page covers what casement windows do well in Dallas’s climate, what they cost here, and how our Window Installation in Dallas process works from first call to final caulk line. For more on how we approach full window projects, start at our home page or the parent Window Installation service page.
Key Takeaways
- Casement windows in Dallas typically run $650 – $1,400 per unit installed, depending on size, frame material, and glass package.
- Most casement replacements take one day per three to four windows, with minimal interior disruption.
- Every Meridian Dallas job gets a written price before work begins and a written 365-Day Done Right Promise.
- All crews are background-checked, uniformed, and held to The Garrison Standard, operating in the Dallas market since 2009.
- Call (325) 309-2639 for a free, no-pressure estimate; a live person answers any hour, any day.
When You Need Casement Windows
Casement windows work well in Dallas homes with wide openings, hard-to-reach locations above kitchen sinks, or rooms where you want maximum ventilation. They also solve a few problems better than most sliding or double-hung units. Here are the scenarios where Dallas homeowners call us:
- Stiff or seized cranks: Dallas’s heat and humidity cause metal gears inside casement operators to corrode or bind. If the crank takes real effort to turn or makes a grinding sound, the hardware is failing.
- Air leaks around the sash: Casement windows seal by pressing into weatherstripping on all four sides. When that gasket rots away in the sun, you’ll feel drafts in the winter and see higher cooling bills in July and August.
- Condensation or fogging between panes: Once the seal on an insulated glass unit breaks, the window loses its thermal performance. In Dallas’s humid springs, failed seals fog up fast.
- Rooms that feel stuffy with the old windows open: Casement windows catch side breezes better than sliders or double-hungs. If a bedroom or sunroom isn’t getting enough airflow, a casement unit can change that whole room’s feel.
- Small child safety concerns: Casement windows with child-safe locks and limited opening hardware are common in Dallas homes with kids near bench seats or low sills.
- Outdated single-pane or builder-grade aluminum units: Many homes in Richardson, Garland, and Mesquite were built with aluminum-frame casements. Aluminum conducts heat freely and has no meaningful insulation value. Replacing those units with modern insulated frames changes the room’s comfort.
Our Casement Windows Process
We follow a set sequence on every Dallas-area casement window job. The price is on paper before any tool comes out of the truck, and the same crew runs the job from first measurement to final cleanup.
- Measure and quote: A technician visits, measures each opening, checks for rot or frame damage, and writes a line-item price. That number doesn’t change at the door. It’s the price, period.
- Product spec: We select the casement unit that fits the opening and the room. Our portfolio includes ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru, so the choice is driven by measurements and budget, not by what’s sitting in a warehouse.
- Removal and dry-fit prep: On install day, the crew removes the old sash and frame, inspects the rough opening, and repairs any rot in the sill or jambs before setting anything new. We don’t cover up decay; we fix it.
- Level set and seal: Each casement unit goes in plumb and square, then gets sealed with backer rod and exterior-rated caulk, not a smear of whatever’s closest. The sill gets pitched so water runs off, never toward the interior.
- Hardware adjustment and test: Cranks get burned in with a dozen cycles, the sash closes flat to the weatherstripping on all four sides, and locks get checked by hand. We leave nothing loose.
- Cleanup and walkthrough: We vacuum the work area, haul the old windows, and walk the job with you before we leave. Your 365-Day Done Right Promise is in your hand before we pull out of the driveway.
Casement Windows Pricing in Dallas
Casement window replacement in Dallas typically runs $650 to $1,400 per unit installed. Small units in standard openings sit near the bottom of that range; large or custom-size casements with premium glass packages land near the top. This range reflects current Dallas market pricing for full-frame or insert replacement, not just the cost of the window itself.
What moves the price:
- Frame material: Vinyl casements are the most common in Dallas and run lower. Composite and aluminum-clad wood casements cost more, and they’re worth it in specific applications where sheer strength matters.
- Glass package: Standard insulated glass keeps pricing moderate. Low-E glass (a thin coating that reflects heat while letting light through) adds cost and cuts Dallas cooling bills enough to justify itself in most west-facing rooms.
- Opening size and shape: A 2-by-3-foot casement is much less than a 4-by-5-foot unit. Tall, narrow, or arched casements push labor and glass pricing up.
- Interior trim and stool work: If the old window had a rotted stool or apron, replacing that wood adds time and material. We quote it as a line item so you see exactly what you’re paying for.
- Access: First-floor casements go in fast. A second-story unit over a sloped roof or a tall ladder carries a small labor upcharge.
Every Meridian Dallas quote is a fixed price, written down, before any work begins. No surprise fees at the door, no change order after the wall is open. Call (325) 309-2639 for a free estimate, and we’ll give you a real number for your specific windows, not a generic ballpark.
Why Casement Windows Work in Dallas’s Climate
Dallas sits in a climate zone where cooling demand dominates eight months of the year, but winter cold snaps still show up in January and February. Casement windows handle that swing better than most designs because their compression seal acts like a refrigerator door: the sash presses into the gasket as the lock closes, cutting down air infiltration.
What we see in the field drives most of what we recommend here. In Oak Cliff and East Dallas, older casement units often have single-pane glass and metal frames that radiate heat straight into the room. In newer builds across Frisco and McKinney, we see vinyl casements with decent initial seals that fail early because cheap weatherstripping cracked in the sun. A meridian is a fixed line you measure everything against; that’s what the name means and how we run every install.
Every replacement we install in Dallas uses insulated glass and fresh weatherstripping as a baseline. If the unit faces west or south, we typically recommend low-E glass. The added cost is modest, and the summer temperature drop in those rooms is measurable.
Which Manufacturers We Use and Why
We don’t push a single window brand on every job. Dallas homes vary in window size, frame condition, and budget. Our team works with eight manufacturer lines, and for casement windows specifically, we lean on a few that hold up in this heat:
- ES Windows: Heavy extruded aluminum frames built for high-wind exposure. Good choice for second-story or exposed gable ends in Dallas’s storm season.
- ECO Window Systems: Impact-rated options that meet Texas coastal codes, which also happen to hold up well against North Texas hail and wind events.
- Mr-Glass: Practical, well-insulated vinyl casements that keep pricing reasonable without cutting corners on the seal or the operator.
- Therma-Tru: A proven name in door systems that also produces casement and awning windows with good thermal numbers for Texas heat.
The right window is the one that fits your opening, your exposure, and your budget. We spec that on paper, and you approve every line before ordering.
The Garrison Standard and the 365-Day Done Right Promise
Meridian Windows and Doors Dallas is part of the Garrison Partners family, operating to The Garrison Standard since 2009. The Garrison Code governs how our crews behave on your property: show up when we say, wear a uniform, cover the floors, remove the old window completely, and leave the site cleaner than we found it.
Every casement window installation carries a written 365-Day Done Right Promise. If the install or repair fails within that period, we return at no charge. No fine print about labor exclusions, no argument about whose fault it was. If it’s not done right, we make it right.
We also put the price in writing before any work begins, always. Price-changing at the door is not how Garrison Partners works, and it’s not how Meridian Dallas works either.
Casement Windows vs. Double-Hung and Sliders in Dallas
Homeowners ask us this constantly: which window style makes sense in Dallas? The straight answer is that each has jobs it does well.
Casement windows seal tighter than any other operating style because the sash compresses the weatherstripping on all four sides. They open fully, so they catch Dallas’s southeast breeze in the morning better than a double-hung that only opens half its surface area. They also tend to be easier to clean from inside, which matters on second-story installations.
Double-hung windows are the workhorse of older Dallas homes. That classic look works well on traditional facades, and tilt-in sashes make cleaning simple. But double-hung windows only get a fraction of a casement’s compression seal, and the meeting rail in the middle is a weak point in howling north winds.
Sliding windows-including Horizontal Roller Windows-are common in builder-grade Dallas construction. They’re inexpensive, but the track system wears out in the grit and dust, and the seal is generally the weakest of the three styles.
For rooms where air infiltration matters most, or where a wide Picture & Fixed Window needs a functional companion panel, casement units often win. We’ll show you the difference in person and let the measurements drive the call.
FAQs – Casement Windows
How much does a casement window replacement cost in Dallas?
A casement window replacement in Dallas typically costs between $650 and $1,400 per unit installed, depending on size, frame material, glass package, and access difficulty. Call (325) 309-2639 for an exact quote; estimates are free, and the number we write down is the number you pay.
Are casement windows more energy-efficient than sliders in Dallas?
Yes, casement windows are generally more energy-efficient than sliders because the sash compresses against weatherstripping on all four sides when closed, creating a tighter seal than a sliding track. In Dallas summer heat, that reduced air infiltration means less conditioned air escaping and lower cooling demand. A low-E glass upgrade makes the difference bigger, especially on south and west-facing walls.
Can you install casement windows in an older Dallas home?
Yes, we install casement windows in older Dallas homes routinely, including neighborhoods like Lakewood, Casa Linda, and Preston Hollow. The process typically involves removing the old sash and frame, inspecting the rough opening for wood rot, repairing any damage, and setting the new unit plumb, level, and properly sealed. We do not set a new window over rotted framing.
How long does a casement window installation take?
A typical casement window replacement in Dallas takes one day for three to four windows, depending on access, frame condition, and whether interior trim work is needed. The work area stays clean, the old windows leave with us, and the 365-Day Done Right Promise is in writing before we leave the driveway.
Is it cheaper to repair a casement window or replace it?
If the frame is sound and only the crank, lock, or weatherstripping has failed, repair usually costs less than replacement. But if the glass seal is broken, the frame is warped or rotted, or the unit is more than 20 years old, replacement often makes more sense than chasing one failing part after another. Call (325) 309-2639 and we’ll tell you plainly which way to go; the estimate is free either way.
Get a Written Price for Your Casement Windows
If your casement windows are drafty, fogged, hard to crank, or just tired, call Meridian Windows and Doors Dallas at (325) 309-2639. A live person answers any hour, any day, and we’ll set a time for a technician to measure, walk you through your options, and hand you a written price before any work starts. No pressure, no games, no number that changes at the door. That’s The Garrison Standard, and it’s been our line since 2009.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Dallas.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.