Custom Window & Door Order Cost - Free In-Home Measure, Written Price

How Much Does Custom Window & Door Order Cost in Dallas?

Custom window and door orders in Dallas typically run $600 to $1,800 per window and $1,200 to $4,500 per door installed in 2026. A full-home custom window package for a 2,000-square-foot Dallas house lands between $12,000 and $28,000, while a single custom entry door system usually falls in the $2,500 to $6,500 range depending on materials, glass package, and hardware. These numbers reflect what we quote and install across Dallas neighborhoods from Lakewood to Preston Hollow, and they include product, labor, and a written warranty.

Before you call around for bids, know this: the spread between the low and high end comes down to three things. The window or door line you select, the glass specifications (low-E coatings, impact ratings, argon fills), and the condition of the existing opening. We’ll walk through each factor below, with real numbers attached.

Custom Window & Door Order Cost Breakdown (2026)

Here’s what custom orders actually cost in the Dallas market this year, broken down by category. These are installed prices, not product-only numbers you’d see on a manufacturer website.

These ranges hold for most Dallas homes we measure. A 1950s ranch in Casa View with original wood frames will run toward the higher end because the rough openings need reframing. A newer build in Frisco or McKinney with standard openings sits at the lower end. We give you the written number before work starts, and that number doesn’t move at the door.

What Drives Custom Window and Door Prices Up or Down

Glass is the biggest variable. A standard dual-pane window with a basic low-E coating runs toward the bottom of the range. Add argon gas fill between the panes, a stronger low-E formula for Dallas heat, and laminated glass for impact resistance, and the price climbs 30 to 50 percent per opening. The frame material matters too. Vinyl is the most common and most cost-effective. Aluminum costs more but handles the Dallas sun well on commercial and modern residential styles. Wood-clad frames are the most expensive because they carry both a real wood interior and an aluminum or vinyl exterior.

Let our estimators walk you through it. We carry eight manufacturer lines, PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so the right product is spec’d for your house, not the one that happens to be in stock.

What Affects Custom Window & Door Order Pricing in Dallas

• Glass package and energy code. Dallas adopted the 2021 IECC, which requires a solar heat gain coefficient (SHGC) of 0.25 or lower on most residential windows. That means better low-E glass is standard now, not an upgrade, and it adds $80 to $200 per window compared to older code minimums.
• Impact rating requirements. Homes in designated wind-borne debris zones, especially east and southeast Dallas County, may require impact-rated products. CGI and PGT impact windows run 40 to 60 percent above standard equivalents, but they hold up to the hail and wind events we get every spring.
• Rough opening condition. Older Dallas homes built between 1920 and 1970 often have openings that are out of square or show rot at the sill. Reframing a single opening adds $150 to $400, and that work has to be done before the new unit goes in.
• Custom sizing and shapes. Arched tops, radius windows, and oversized fixed units require custom manufacturing runs. Those rarely fall below $1,200 per unit and can exceed $3,500 for a single dramatic opening.
• Door hardware and security. Multi-point locking systems, smart lock integration, and upgraded hinges add $200 to $800 per door. These are line items on your written quote, never surprises at the end.
• Installation complexity. Second-story work, stucco exteriors, and brick veneer all change the labor picture. Our on-site technicians are background-checked and uniformed, and the labor line on your quote reflects the actual conditions at your house.

Elliot Vance, who leads our Dallas operation, walks every custom order through the same checklist: measure the opening, verify the glass spec against code, confirm the manufacturer’s lead time, and write the price. That discipline is part of The Garrison Standard we operate under, and it keeps custom orders from drifting off schedule or off budget.

How Much Does a Custom Entry Door Cost in Dallas?

A single custom entry door in Dallas runs $2,500 to $6,500 installed in 2026. That includes the slab, frame, hinges, weatherstripping, standard hardware, and labor with a written one-year guarantee. Fiberglass doors with no decorative glass start near $2,500. Steel doors land in the $2,000 to $4,000 range. When you add decorative glass inserts, side lites, or a transom, the project moves to $4,500 to $8,000 or more.

Therma-Tru is our primary line for custom entry systems. Their fiberglass doors hold up to Dallas summer heat without warping, and they accept custom stain and paint finishes that match the interior trim. A meridian is a fixed line you measure everything against, and that’s how we treat the entry door spec: the measurements, glass rating, and hardware placement all go on the order sheet before we cut anything.

For a full look at what goes into a custom order, see our Custom Window & Door Order in Dallas page. It covers the ordering process from measurement to final walkthrough.

How Much Does a Custom Patio Door Cost in Dallas?

A custom sliding patio door in Dallas falls between $1,800 and $4,200 installed. Custom French doors, which are two hinged panels, run $2,800 to $5,500. The main variables are the frame material, the glass package, and whether the door is a standard 6-foot opening or a wider custom span that needs a reinforced header.

Dallas homes with west-facing patios put a serious heat load on patio doors. We spec doors with low-E glass, a thin coating that reflects heat while letting light through, and recommend argon-filled dual panes for those exposures. ES Windows and ECO Window Systems both make aluminum patio doors that hold a straight frame line in our climate, and CWS carries vinyl options that come in under $2,500 for standard openings.

Our crew installs patio doors with the same written guarantee as every other project: covered in writing for 365 days. If the door slips, sticks, or leaks during that year, we come back at no charge. No fine print on labor exclusions.

Is It Cheaper to Order Custom Windows or Buy Stock Sizes?

Stock windows run 25 to 40 percent less than custom units of the same material and glass package. A stock vinyl single-hung for a standard 36-by-60 opening might cost $400 to $600 installed, while the custom equivalent runs $600 to $1,100. The tradeoff is fit and lead time. Stock windows are available in standard sizes only, so a Dallas home with non-standard rough openings will need shimming, filler trim, or reframing to make them work. Custom windows are manufactured to the exact opening, which produces a tighter seal and a cleaner interior trim line.

We carry both. If your openings are standard, we’ll tell you and quote the stock option. If they are not, we’ll quote the custom unit and show you the difference in writing before you commit. That’s the no-hassle upfront pricing we run under: the price goes on paper before any work starts.

How to Save on Custom Window & Door Order in Dallas

• Phase the project by elevation. If the whole house is too much at once, start with the south and west elevations. Those carry the heaviest Dallas heat load, so they produce the biggest utility and comfort return per dollar.
• Standardize sizes where possible. When we measure a home, we sometimes find two or three openings within an inch of each other. Adjusting the rough opening slightly to standardize on one size cuts manufacturing cost and labor time.
• Bundle windows and doors in one order. Manufacturing setup costs are shared across units, and the labor crew makes one trip. Bundling typically saves 5 to 12 percent versus separate orders.
• Keep the installed hardware simple. A solid multi-point lock is essential, but custom finishes and smart hardware add real cost. We quote standard hardware and show upgrade pricing as line items, so you decide.
• Ask about manufacturer lead times before you commit. Some lines run 6 to 8 weeks on custom glass, others run 3 to 4. If timing matters, we can spec a line that ships faster without changing the glass package.
• Get the written estimate before you make any decisions. A free estimate from us takes the guesswork out. Call (325) 309-2639 and we’ll send a technician to measure, spec, and price the job. The number on that sheet is the number you pay.

Custom Window & Door Order Timeline in Dallas

Custom windows and doors are not same-day products. Here’s what a realistic Dallas timeline looks like in 2026, from first call to final walkthrough.

• Day 1-2: Measure and spec. A technician measures every opening, checks the rough framing, and walks you through glass options and manufacturer lines. We also verify local code requirements, including SHGC and any wind-borne debris zone provisions.
• Day 3-7: Written quote delivered. You get a line-item price on paper. No deposit required to hold the quote, no price changes at the door.
• Week 1-8: Manufacturing. Standard custom windows from CWS or ViewLux run 3 to 5 weeks. Impact-rated units from PGT or CGI run 6 to 8 weeks depending on the glass package. Therma-Tru entry doors run 4 to 6 weeks for custom configurations.
• Week 8-10: Installation. A typical 12-window package takes 1 to 2 days with a two-person crew. A full entry door replacement is a 1-day job unless the rough opening needs repair.
• Walkthrough and guarantee. We walk the job with you, explain the care and maintenance, and hand you the written 365-Day Done Right Promise. If it fails within that year, the second visit is free.

This timeline is typical, not a promise of speed. We don’t cut manufacturing lead times with shortcuts. The Garrison Code we operate under means showing up as promised, pricing honestly, and standing behind the work. Custom glass takes the time it takes to be done right.

FAQs – Custom Window & Door Order Cost

How much does it cost to replace all windows in a Dallas house?

Replacing all windows in a 2,000-square-foot Dallas home costs $12,000 to $28,000 in 2026, depending on the number of openings, glass package, and frame material. A 1,200-square-foot mid-century home with 8 to 10 windows falls closer to $7,000 to $14,000. Call (325) 309-2639 for an exact quote, estimates are free.

Is it cheaper to repair or replace custom windows?

Repairing a single window, like a failed seal or broken sash, costs $150 to $500, while replacing that same opening with a custom unit runs $600 to $1,800. If the frame is intact and the failure is limited to glass or hardware, repair is the better value. If the frame is warped or the unit is more than 20 years old, replacement saves money over repeated repairs. Call us and we’ll tell you straight which way to go.

How much do impact windows cost in Dallas?

Impact-rated custom windows in Dallas run $1,100 to $2,400 per unit installed, roughly 40 to 60 percent above standard equivalents. The higher cost buys laminated glass and reinforced frames that hold up to the hail and high wind events that hit Dallas each spring. We carry PGT and CGI impact lines, and we’ll show you the price difference on a written quote. Call (325) 309-2639 for a free estimate.

Do you do same-day custom window estimates?

We schedule Dallas estimates within 24 to 48 hours in most cases, and our phones are answered by a live person 24/7. Custom window orders themselves are not same-day products because the units are manufactured to your opening, but the estimate visit is fast, and the written quote follows within a week. Call (325) 309-2639 to schedule a measurement.

How much is a custom front door with glass in Dallas?

A custom front door with decorative glass in Dallas runs $3,500 to $8,000 installed, depending on the glass pattern, side lites, and transom configuration. A standard fiberglass door without glass starts at $2,500. Therma-Tru is our main line for these, and the glass inserts are spec’d to your exact entry. Call (325) 309-2639 for a written quote.

What is the 365-Day Done Right Promise?

The 365-Day Done Right Promise is the written guarantee on every custom window and door installation we do in Dallas. If the product or the labor fails within 365 days, we return and make it right at no charge, including labor. It’s one page, no fine print, and it comes with every job.

Get Your Custom Window & Door Order Priced in Writing

The fastest way to know exactly what your custom window or door project will cost is to have us measure it. Call (325) 309-2639 and a real person answers, any hour of any day. We’ll schedule a technician to come out, take the numbers, spec the glass, and deliver a written line-item price before you commit to anything. No pressure, no door-knock tactics, no price that moves after the fact. That’s how Meridian Windows and Doors Dallas runs every job, and it’s how you’ll know the number before a single screw turns.

If you want to understand more about the process first, start with our home page or the Custom Window & Door Order in Dallas guide. Both walk through how a custom order works from first measure to final walkthrough.

Pricing reflects the Dallas market as of 2026. Meridian Windows and Doors Dallas offers free estimates – call (325) 309-2639.