New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Garland
Window installation in Garland starts with a written price before any work begins, and that is how Meridian Windows and Doors Dallas runs every job that crosses the city line. We work in Garland neighborhoods from Duck Creek to North Garland weekly, and our crews know what a 1968 aluminum double-hung looks like when it comes out of the opening. Most single-window replacements in Garland run $600 – $1,400 installed depending on size, frame type, and glass package. Call (325) 309-2639 to schedule a free estimate, and we will put the number on paper before a single screw turns.
Why Meridian Windows and Doors Dallas Is Garland’s Preferred Window Installation Company
The Garrison Standard has governed our work since 2009, and Garland homeowners see that discipline on every call: background-checked, uniformed technicians who show up as promised and do not leave sill caulk a mess. Elliot Vance leads the crew, and he holds every install to a written 365-Day Done Right Promise. If the window fails within that year, we return at no charge. No labor exclusions, no fine print.
Garland is dominated by mid-century ranch and traditional brick homes built between 1960 and 1990. That stock brings a specific set of problems: original aluminum frames, undersized rough openings, and waterproofing that has long since stopped waterproofing. Our Window Installation team sees these failures every week, not once a season. The reviews from Garland customers point to the same things: the price did not move at the door, the crew covered the floors, and the old window left the property in our truck, not in the flower bed.
A live person answers our phone 24 hours a day, seven days a week. When a Garland homeowner calls with a failed sash at 7 p.m., they speak to a person, not a voicemail loop.
Window Contractor in Garland
A Window Contractor in Garland does more than swap glass and nail trim. On older Garland homes, the contractor is the person who discovers what is behind the drywall: out-of-square rough openings, wiring stapled to the frame, and flashing that crumbled years ago. Meridian Windows and Doors Dallas handles that discovery with a process: inspect the opening first, write allowances for hidden framing or electrical work into the contract, and price any surprise in writing before we touch it.
Garland’s aging 1960s-80s housing stock, especially in established neighborhoods like Duck Creek and North Garland, features numerous aluminum-frame single-pane windows that are now failing in the Texas heat. Many of these openings were framed to code in 1972, but energy and structural standards have moved. A permitted replacement triggers Garland’s energy-code upgrade requirement, which means the window you install must meet current ratings. We pull the permit, schedule the inspection, and stand behind the pass.
Permit and Code Handling
Unpermitted retrofits fail final inspection routinely in Garland. The city requires energy-code compliance on replacement windows, and a contractor who skips the permit leaves the homeowner holding a stop-work notice and a costly redo. Our team files the permit as part of the job, not as an optional line item.
Hidden Damage Allowances
No honest contractor can price hidden framing damage without opening the wall. What we do is write a specific allowance for reframing, flashing, and waterproofing into the contract before work starts. If the opening comes apart square, you pay less. If it does not, the written allowance covers the fix, and any amount beyond it requires your signed approval first.
Window Installers in Garland
Window installers in Garland need to understand how a 1970s brick ranch is put together before they cut the first piece of flashing. Meridian’s crews have replaced windows in hundreds of Garland homes, and the pattern is consistent: the original frames come out, the rough opening reveals itself to be 1/2 to 3/4 inch out of square, and the waterproofing has turned to powder. Our installers reframe, reflash, and set the new unit so it drains correctly.
In Garland’s Duck Creek neighborhood, the original 1970s aluminum windows are notorious for corroded weep holes that cause water intrusion during spring thunderstorms. A homeowner may not see the damage until the drywall stains or the sill rots. Our techs pull the old sash and find the weep holes plugged solid with white corrosion. The fix is not a patch; it is a new window with a properly sloped sill pan and new flashing, installed to drain away from the opening.
Reframing Out-of-Square Openings
We recently opened a wall on a 1968 ranch in Duck Creek to replace a failed aluminum double-hung, only to find the rough opening was 3/4 inch out of square and the original waterproofing had disintegrated. Our crew reframed the jamb, added new flashing, and installed a PGT impact-rated casement with low-E glass, bringing the opening from a leak liability to a Florida Product Approval-rated assembly the homeowner now talks about during hail season.
Brick Veneer and Nail-Fin Retrofit
Most Garland homes are brick veneer over wood framing. A replacement window in that wall does not require disturbing the brick; we cut the interior stop, remove the old frame, and install a retrofit unit sized to the existing opening. The brick veneer stays put, the stucco or siding stays put, and the new window seals tight against the old opening.
Trusted Brands We Service in Garland
Meridian Windows and Doors Dallas is authorized to install and replace products from eight manufacturer lines, so the right window gets spec’d for the job rather than whatever happens to be in stock. For Garland’s hailstorms and humid summers, we regularly install ECO Window Systems impact-rated units, Mr-Glass low-E packages, and Therma-Tru doors and frames where the opening needs a full replacement. We stock common local parts for quick turnaround, which matters when a spring storm takes out a pane and the window cannot wait three weeks.
Common Window Installation Problems We See in Garland Homes
- Corroded weep holes on 1970s aluminum frames. Duck Creek in particular has a concentration of these failures that neighboring cities rarely see. A plugged weep hole holds water in the track, and the first visible sign is often a stained interior sill after a spring thunderstorm.
- Out-of-square rough openings. Garland homes built between 1960 and 1990 were framed quickly, and an opening that has shifted 3/4 inch over 50 years will not accept a new window without shimming and reframing. Installers who force a square unit into an out-of-square hole get a window that binds and leaks.
- Missing or failed flashing. Many original Garland installs used builder-grade paper or nothing at all around the head and jambs. When the old frame comes out, we often find the flashing has dried to dust or was never installed. New flashing is not optional.
- Unpermitted retrofits that fail inspection. Openings done without a permit trigger Garland’s energy-code upgrade requirement. When the city catches an unpermitted window replacement, the homeowner pays for the rework and the fine, not the contractor who disappeared.
Pricing for Window Installation in Garland, TX
A single double-hung replacement in Garland typically runs $600 – $1,200 installed depending on the glass package and whether the opening needs reframing. Casement windows run $800 – $1,400 because the hardware and sash assembly cost more. A 3-panel sliding window in a Garland family room runs $1,200 – $2,400 installed. Bay and bow window installations start around $2,500 and go up based on the roofing and structural work involved.
What moves the price on a Garland job: whether the opening is square or needs reframing, whether we must upgrade the rough opening to meet current energy code, and whether hidden water damage has rotted the sill or the studs behind the brick. Every quote we give is written before work starts. The number on that paper is the number you pay. Call (325) 309-2639 for a free estimate, and we will walk the house and put the price in writing the same visit.
We Also Serve Cities Near Garland
Meridian’s Garland crews also run calls in Sachse, Rowlett, Dallas, and Seagoville. If you are just outside the city and wondering whether we cover your street, call (325) 309-2639 and a live person will tell you. The same written pricing and 365-Day Done Right Promise apply across the whole service area. For more on what we do, see Window Installation or our Window Installation in Garland page.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Garland
Yes, a permitted window replacement in Garland triggers the city’s current energy-code requirements, so the new window must meet today’s U-factor and solar heat gain standards for this climate zone. That means code-compliant low-E glass in most cases, which is a good thing in Garland’s hot, humid summers. Our team pulls the permit, installs to code, and schedules the inspection. Call (325) 309-2639 if you have a specific opening we can evaluate.
We write a specific allowance for hidden framing, flashing, and waterproofing into the contract before work starts, and the allowance is based on what we typically find in Garland homes of that era. If the opening comes apart clean, you do not pay the allowance. If we find corrosion and water damage, the written allowance covers the repair, and anything beyond it requires your signed approval before we proceed. The price never moves at the door.
Yes, impact-rated windows install as a retrofit unit inside the existing opening, which means the brick veneer stays untouched. We remove the old frame from the interior, set the new impact window in the opening, and seal it with new flashing. For Garland’s hail and high-wind storms, an impact-rated unit with laminated glass interlayer is a practical upgrade over standard annealed glass.
When we find outdated aluminum wiring stapled to the window frame during a removal, we stop work at that opening and flag it for you before we proceed. The Garrison Code is clear: we do not move or reconnect wiring that is not up to current code. A licensed electrician handles the wiring, and the window goes in after the opening is safe and compliant. The cost of that electrical work is priced in writing before it happens.
For Garland, impact windows with a laminated glass interlayer are worth it if you want storm protection and noise reduction along with energy efficiency. Low-E alone cuts heat gain, and for many Garland homes that is the right call. But Garland sees hail and high winds every spring, and an impact-rated unit holds together when a storm throws debris at the glass. We will show you both options with written pricing and let you decide. Call (325) 309-2639 for an exact quote.
Call (325) 309-2639 to schedule your free estimate. We answer live, we price in writing, and we stand behind the install for 365 days.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Garland since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.