New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Uptown Dallas
Window installation in Uptown Dallas typically runs $850 – $2,400 per opening for standard replacements, with picture windows and bay units landing between $1,800 and $4,500 installed. Most jobs in the district’s high-rise buildings take two to four weeks from contract to completion, with architectural review adding one to three weeks on top. We know this because we work these buildings every month, filing HOA submittals and scheduling crane access. Call (325) 309-2639 for a written quote before you commit to anything.
Why Meridian Windows and Doors Dallas Is Uptown Dallas’s Preferred Window Installation Company
Meridian Windows & Doors runs on The Garrison Standard, the operating code of the Garrison Partners family we belong to. It has been the house rule since 2009: written price before work starts, background-checked and uniformed technicians on every call, and a live person answering the phone around the clock. No voicemail loops. No surprises at the door. Elliot Vance leads our Dallas operation, and he holds every install to that standard personally. Window Installation is not a sideline for us; it is the whole job, day in and day out. The 365-Day Done Right Promise sits in writing on every project: if the work fails within a year, we come back at no charge. No labor-exclusion fine print.
We have replaced windows in Uptown Dallas towers where the original 2000s-era builder glass is now fogged, warped, or leaking at the jambs. Residents along Cedar Springs Road, McKinney Avenue, and the State Thomas Historic District call us because we already know their building’s architectural review requirements. That local knowledge is the difference between a clean two-week approval and a rejected submittal that stalls the job for months. Our crews work Uptown Dallas weekly, so response time is measured in days, not weeks. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, but the teams serving Uptown Dallas work here locally.
Picture Window in Uptown Dallas
A Picture Window in Uptown Dallas is a fixed, non-operable glass unit built to frame a view, and in this district that view is often the Dallas skyline from a 15th-floor living room. The job involves removing the existing fixed sash, inspecting the rough opening for water damage, setting the new insulated glass unit, and flashing and sealing the perimeter to handle the wind loads that hit upper-floor elevations. A typical picture window replacement in Uptown Dallas runs $1,800 – $3,800 installed, depending on glass package and frame finish.
Impact-Rated Glass for High-Rise Exposure
South- and west-facing units in Uptown Dallas catch relentless sun, which is why many HOA boards now require impact-rated or high-performance low-E glass (a thin coating that reflects heat while letting light through) in fixed windows. We spec PGT and ECO Window Systems units with design pressure ratings built for 20-plus-story wind loads. That is not an upsell. It is what keeps the window from whistling during a spring storm.
Matching the Building’s Original Sightlines
In towers built during the 2000s boom, the original aluminum frames have a specific profile width and finish. Your HOA architectural committee will notice if the new frame reads chunkier or shinier than the neighbor’s. We match frame color, glass tint, and sightline dimensions against the building’s original spec before we ever order the unit.
Bay Window Installation in Uptown Dallas
Bay Window Installation in Uptown Dallas is less common than in the single-family suburbs, but it comes up in converted warehouses and the newer townhomes scattered through the State Thomas area and along Boll Street. The job means building out a three-dimensional window projection, which requires structural support, roof or cap flashing, and careful sealing at every joint. A bay window installation in Uptown Dallas typically runs $3,200 – $4,800 for a three-panel unit, installed.
Structural Support and Cantilever Work
A bay window extends past the exterior wall, so the supporting knee braces and header structure have to carry the full weight of the glass unit. In older converted warehouse lofts, we often find the original rough opening was never framed for a projection, which means adding structural work before the window ever goes in. We pull permits when structural changes are required and we file the paperwork ourselves.
Sealing Against Wind-Driven Rain
Uptown Dallas spring storms push rain horizontally against building faces, and a bay window’s multiple joints are the first place water finds its way in. We use flashing tape at every seam, slope the top cap to shed water, and seal the underside with backer rod and a high-grade exterior sealant. The 365-Day Done Right Promise covers every one of those joints in writing.
Trusted Brands We Service in Uptown Dallas
We install and replace windows from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That is eight manufacturer lines, which matters when your HOA board names a specific brand in the architectural guidelines. We are authorized to install Therma-Tru, Mr-Glass, and ViewLux products, and we keep common Uptown Dallas parts and hardware in local inventory so replacement sashes and rollers do not sit on backorder for weeks. Your pricing stays written before any work starts, regardless of which manufacturer we spec.
Common Window Installation Problems We See in Uptown Dallas Homes
- Failed seals in original builder glass. Most Uptown towers went up between the late 1990s and the 2010s. The original double-glazed units are now 15 – 25 years old, and seal failure shows up as fogging you cannot wipe away.
- HOA architectural rejections. Homeowners buy replacement windows that do not match the building’s approved frame profile, finish, or glass tint. The board rejects the submittal, and the homeowner is left holding windows they cannot install.
- Undersized design pressure ratings. Crews unfamiliar with high-rise work install units rated for single-family homes. On the 20th floor of a tower on McKinney Avenue, wind-driven rain finds every weak jamb.
- Wrong access equipment. Using a boom lift where a swing stage is required damages balcony railings and ground-level landscaping. The HOA then issues a common-area assessment, and the homeowner pays for the repair.
Pricing for Window Installation in Uptown Dallas, TX
Here is what we quote in Uptown Dallas today. Single and double hung windows: $850 – $1,600 per opening. Horizontal roller windows: $900 – $1,700. Three-panel sliding (3-lite roller) units: $2,200 – $3,800. Casement windows: $950 – $1,900. Awning and hopper windows: $700 – $1,200. Picture and fixed windows: $1,800 – $3,800. Bay and bow windows: $3,200 – $4,800. Garden windows: $1,600 – $2,800. These are installed prices for standard sizes with mid-grade glass packages. High-rise access (crane, swing stage, or scaffolding) adds $400 – $900 per job depending on the building. Impact-rated glass adds 15 – 25% to the unit cost. Every quote is written, line-itemed, and fixed before any work starts. Call (325) 309-2639 for your free estimate.
We Also Serve Cities Near Uptown Dallas
Our crews serve the full Uptown Dallas district plus the surrounding metro. Homeowners in Dallas, Garland, Cedar Hill, and Grand Prairie call us for the same written pricing and 365-Day Done Right Promise. If you are just outside the Uptown core, we still schedule the same week and price the same way.
Serving Uptown Dallas, TX - Our Local Coverage Area
We’re based in the Uptown Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Uptown Dallas
One to three weeks is the typical range. We prepare the full submittal packet (product spec sheets, frame finish samples, glass tint documentation, and design pressure ratings) and file it with your building’s review committee. Some boards meet monthly, which adds time; others review electronically and turn it around in a week. We schedule the installation date only after approval is in hand, so your opening is never left half-finished waiting on a committee. Call (325) 309-2639 and we can pull your building’s review timeline before you buy.
In most Uptown high-rises, yes. The architectural guidelines for many of these towers specify the exact frame finish (often a gray or bronze aluminum) and the permitted glass tint to preserve the building’s original 2000s-era aesthetic. We pull your building’s guidelines, verify what is approved, and spec the product to match before you spend a dollar. If your board allows a deviation, we will tell you exactly what the variance process requires.
Yes. Many Uptown towers have no exterior access from individual units, which is why we schedule a crane or swing stage. This is a logistical challenge unique to dense high-rise districts like Uptown, and it is why you do not want a crew that only works single-family homes. We coordinate with building management on the access calendar, set the equipment days in advance, and complete the full swap in one visit.
We re-submit with a revised specification, and we do it at no additional cost. The written price you already have does not move. In practice, rejections happen when a homeowner buys windows before checking the building’s guidelines. We avoid that by filing the submittal ourselves and matching the building’s original spec from the start. If a board still asks for changes, we handle the revision and keep the job moving.
Yes, and they are stricter. Uptown’s towers sit at elevations where wind loads are significantly higher than ground-level single-family homes, and many HOA boards now mandate impact-rated glass with design pressure (DP) ratings matched to the building height. A DP50 window that works fine in Garland will leak on the 18th floor of a Cedar Springs tower. We spec to the building’s actual exposure, and the rating goes into the submittal packet for the committee to review.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Uptown Dallas and the Dallas-Fort Worth metro.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.