New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
How Much Does New Window Installation Cost in Dallas?
New window installation in Dallas, TX typically runs between $450 and $1,400 per window installed in 2026, with most mid-range vinyl replacements landing in the $600 to $900 range. For a standard 2,000 sq ft home needing 10 to 15 windows, homeowners should budget $6,000 to $18,000 total, depending on window style, frame material, and glass package. Premium builds using impact-rated or wood-clad windows push the top end higher, and we’ll break down exactly why below.
Key Takeaways: New Window Installation Cost in Dallas
- Average cost per window: $450-$1,400 installed, materials and labor included
- Typical 10-window project: $6,000-$14,000 for vinyl; $10,000-$25,000 for fiberglass or wood
- Labor share: $150-$350 per window, depending on accessibility and frame condition
- Biggest cost drivers: window style, glass package (low-E, argon, impact), frame material, and whether the opening needs repair
- Permit costs in Dallas: $50-$200 for a standard residential window replacement permit
- Payback on energy savings: 5-10 years for energy-efficient upgrades in Dallas’s climate, faster with south- and west-facing windows
Meridian Windows and Doors Dallas has installed replacement windows across Dallas, Plano, Richardson, Garland, and Mesquite since 2009. The numbers here come from actual bids we’ve written, the Dallas permitting office’s current fee schedule, and manufacturer pricing from the eight lines we carry: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. If you want a number specific to your house, call (325) 309-2639 and we’ll put a written price in front of you before any work starts.
New Window Installation Cost Breakdown (2026)
Here’s what window installation in Dallas costs in 2026, line by line. These ranges reflect what we’re seeing in the field right now, not national averages pulled from a database.
Cost Per Window by Frame Material
| Frame Material | Cost Per Window (Installed) | Notes |
|---|---|---|
| Vinyl | $450-$900 | Most common in Dallas. Good thermal performance. 20-30 year typical lifespan. |
| Fiberglass | $800-$1,400 | Stronger frames, smaller sightlines. Less expansion/contraction in Texas heat. |
| Aluminum | $500-$1,000 | Common in mid-century Dallas homes. Conducts heat; best with thermal breaks. |
| Wood / Wood-Clad | $1,000-$2,200 | Mostly for historic districts like Swiss Avenue or Munger Place. Requires maintenance. |
| Composite | $700-$1,300 | Blend of wood fiber and polymer. Holds paint well, resists rot. |
Cost by Window Style
| Window Type | Cost Per Window (Installed) | Where We Install Them in Dallas |
|---|---|---|
| Single-Hung | $400-$800 | Budget option. Bottom sash only moves. Common in rental properties and flips. |
| Double-Hung | $500-$1,100 | Both sashes tilt in for easy cleaning. Most popular replacement in Dallas. |
| Casement | $650-$1,300 | Crank-operated, seals tight. Great for north-facing rooms needing better air control. |
| Sliding | $500-$1,000 | Wide openings. Common in ranches across Richardson and Garland. |
| Picture / Fixed | $400-$900 | Non-operable. Large living room windows without the swing cost. |
| Bay / Bow | $2,500-$6,000 (full unit) | Projects from the wall. Structural work required. Common in older East Dallas homes. |
| Impact-Rated (PGT/CGI) | $900-$1,800 | Laminated glass with reinforced frames. Worth considering in hail-prone corridors. |
Labor and Ancillary Costs
- Basic labor per window: $150-$350. Includes removal of the old sash, frame prep, install, insulation, trim, and haul-away.
- Full-frame replacement add-on: $100-$250 per window. Necessary when the existing frame is rotted or the opening needs re-squaring. Retrofit (insert) installs run cheaper and work when the existing frame is sound.
- Interior trim / casing: $40-$120 per window. We often see drywall or molding damage on the inside of older Dallas homes during removal; it’s part of the job, not a surprise upcharge.
- Exterior caulking and flashing: Included in our per-window price. If a previous contractor left gaps at the sill, water gets behind brick veneer fast in Dallas storms.
- Haul-away and disposal: Included with Meridian Windows and Doors Dallas. Some competitors charge $25-$75 per window; we don’t.
Optional Upgrades
- Low-E glass: $40-$90 per window. A thin metallic coating that reflects heat while letting visible light through. In Dallas, where cooling dominates 7 months of the year, low-E on south- and west-facing glass pays back fastest.
- Argon gas fill: $30-$60 per window. Denser than air, slows heat transfer between the panes.
- Triple-pane glass: $150-$350 per window over double-pane. Marginal benefits in North Texas compared to colder climates. We’ll tell you honestly if it’s not worth the money in your situation.
- Obscure / privacy glass: $30-$80 per window. Common in bathrooms, and we see demand in zero-lot-line homes where neighbors sit close.
Every one of these prices goes on paper before a screw turns. Meridian Windows and Doors Dallas is part of the Garrison Partners family, and the discipline is this: written price up front, no changes at the door, and a 365-Day Done Right Promise on every installation in writing. If the work fails within that year, we return at no charge.
What Affects New Window Installation Pricing in Dallas
Dallas isn’t a generic market. Here are the factors that move the number on a window bid here specifically.
- Frame condition in older brick homes: Dallas has a huge stock of 1950s-1970s brick ranches. In neighborhoods like Casa View and Lochwood, we regularly find water damage behind the old aluminum frames because original flashing failed decades ago. A retrofit goes out the window when the frame is rotted; full-frame replacement becomes the only honest option, and it adds $100-$250 per opening.
- Hail history and glass choice: DallTX sits in a hail corridor. Homes west of 75 and north of 635 get hit harder and more often. Impact-rated windows from PGT or CGI cost $400-$900 more per window than standard glass, but they stop the cycle of glass replacement every few years. For some homeowners, especially those who’ve filed two hail claims, the math works.
- Orientation and energy load: South- and west-facing windows take direct Texas sun from noon to sunset. These are the windows where low-E glass and argon matter most. A 10-window job might mix glass packages: low-E on the sun side, standard glass on the north side. That’s the right way to spec windows, and it changes the total by $300-$900 depending on exposure.
- Number of windows in the job: The per-window labor cost drops when we’re doing 12 windows in one visit versus 2. Mobilization (loading, travel, site setup) is roughly the same whether it’s one opening or fifteen. Most Dallas window companies have a minimum job charge of $800-$1,200 regardless of window count.
- Second-story access: A one-story ranch in Garland is straightforward. A two-story in Preston Hollow or Lake Highlands with difficult ladder access or an upper deck in the way adds $50-$150 per window in labor. Nothing dramatic, but it’s in the bid.
- Permit requirements: The City of Dallas requires a permit for window replacement when structural changes are involved, like enlarging an opening or installing a bay window. Standard same-size replacements typically don’t need one, but a full-frame job in a Historic District (Swiss Avenue, Munger Place) requires review. Permit fees run $50-$200, and Meridian handles the paperwork.
How Much Does Window Installation Cost in Dallas vs. Nearby Cities?
If you live in a suburb, your number is slightly different. Here’s what window installation runs in the surrounding areas.
| City | Cost Per Window (Installed) | Local Variation |
|---|---|---|
| Dallas | $450-$1,400 | Baseline. Both permit fees and labor rates reflect the denser urban market. |
| Plano | $450-$1,350 | Slightly lower labor competition. Newer housing stock means fewer full-frame jobs. |
| Garland | $400-$1,300 | Higher percentage of retrofit installs on ranch homes; often at the lower end. |
| Richardson | $450-$1,350 | Mixed housing stock. Telecom-corridor homes built in the 70s and 80s often need full frame. |
| Mesquite | $400-$1,250 | More budget-conscious market, but same installer pool drives comparable rates. |
| Irving | $450-$1,400 | Same as Dallas pricing; adjacent labor market. |
| Highland Park / University Park | $800-$2,200 | Older estate homes, wood-clad spec, and stricter HOAs push the top end. |
Meridian Windows and Doors Dallas quotes and installs all over Dallas, Plano, Richardson, Garland, Mesquite, and nearby communities. The price doesn’t change when we cross a city line; it changes based on the house, the opening condition, and the window spec.
How to Save on New Window Installation in Dallas
Saving money on windows doesn’t mean finding the cheapest bid. It means spending where it matters and skipping waste. Here’s how to keep a window project lean in 2026.
- Replace windows in phases, but do full sides at once. Doing just one or two windows at a time means paying the minimum job charge multiple times. If the south-facing side has the worst heat gain, do all south windows in one phase. You’ll pay mobilization once, not three times.
- Spec the glass to the exposure. You don’t need low-E on a north-facing window in a shaded backyard. Putting the right glass on the right side of the house can knock $400-$800 off a full-home job. We spec this for every bid; if a contractor puts the same glass everywhere without asking, find another contractor.
- Retrofit when the frame is clean. A pocket or insert install works whenever the existing frame is square and solid. It’s $100-$250 cheaper per window than full frame. We’ll pull the trim on the first window and check before we quote full-frame.
- Skip triple-pane in Dallas. Triple-glazed windows make sense in Minneapolis. In North Texas, the incremental energy savings rarely offset the $150-$350 per-window premium. Double-pane with low-E and argon is the workhorse for our climate.
- Time your project outside peak demand. Spring brings hail-repair backlogs. Fall and winter book slower for window contractors in Dallas. You won’t get a discount necessarily, but you’ll get more schedule flexibility and faster turnaround.
Meridian Windows and Doors Dallas gives a written estimate before work starts, always. Call (325) 309-2639 and we’ll put real numbers on paper for your specific house. No charge for the quote, no pressure to book, and the price you see is the price you’ll pay.
New Window Installation in Dallas: What You’re Actually Paying For
A window is a hole in your wall with glass in it. Installation is everything between the old window coming out and the new one being watertight, level, and operational. In Dallas, here’s what our crews do on every window install, and where the labor dollars go.
Removal and Frame Assessment
The old window gets removed without destroying the surrounding brick, siding, or drywall. In older Dallas homes, this is the moment we find what the last installer left behind. We’ve pulled windows in Lakewood where the gap between the frame and the rough opening was filled with nothing but newspaper. The frame assessment drives whether we do a retrofit or a full-frame replacement. If rot is present in the sill or jamb, it gets cut out and addressed before the new window goes in.
Proper Flashing and Water Management
Dallas gets 38 inches of rain a year, much of it in short, violent storms. A window that doesn’t shed water properly leaks into the wall cavity, and you won’t see the damage for years until the drywall bubbles or the sill rots out. We flash every opening according to manufacturer spec and Dallas code: sill pan flashing at the bottom, tape and seal at the jambs, head flashing that laps over the top flange. The Garrison Code, which is part of how we operate as a Garrison Partners company, requires the flashing to be visible on every inspection photo we send to the office. No exceptions.
Insulation and Air Sealing
The void between the window frame and the rough opening gets insulated with low-expansion foam designed for windows and doors. Everything is sealed on the interior trim and exterior perimeter. Dallas heat pushes air through any gap; sealing is 40% of the energy benefit of a replacement window, not just the glass package.
Trim, Finish, and Cleanup
Interior trim goes back on, exterior caulking is applied and tooled, the window is cleaned, and the work area is swept. The old windows are hauled away. The crew does a final walkthrough with you before they leave. If something doesn’t look right, it gets fixed before the truck rolls.
The 365-Day Done Right Promise
Every installation from Meridian Windows and Doors Dallas is covered in writing for a full year. If the window fails within that period – a broken seal, a crank that binds, a drywall crack that shows up after the fact – we return at no charge. That second visit is free. It’s part of the written guarantee, not a courtesy. The Garrison Standard has been applied to every job since 2009, and the promise is the same on a one-window repair or a full-home replacement.
How Much Does New Window Installation Cost in Dallas? (Quick Answer)
New window installation in Dallas costs $450 to $1,400 per window installed in 2026. The typical mid-range double-hung vinyl with low-E glass runs $600 to $900 per window for a retrofit install. Expect $6,000 to $14,000 for a full-home replacement of 10 to 12 windows with mid-grade vinyl. Impact-rated windows from PGT or CGI add $400 to $900 per window. Wood-clad and bay/bow projects push higher. For an exact number on your house, call Meridian Windows and Doors Dallas at (325) 309-2639 for a free written estimate.
Is It Cheaper to Repair or Replace Windows in Dallas?
Repair beats replacement when the problem is a broken seal, a bad balance, a fogged pane, or a cracked latch on a window that’s less than 15 years old. Glass replacement runs $150-$350 per pane, and a seal or hardware repair lands at $100-$250. When the frame is rotted, the window is leaking air, or the sashes don’t operate, replacement is the honest call. In Dallas, windows over 20 years old in homes with original aluminum frames are almost always better replaced than repaired, especially if you’re seeing condensation between the panes. A new double-glazed low-E window will outperform the old unit by a wide margin, and the energy savings on south- and west-facing glass in Dallas add up inside of 6 to 10 years.
How Much Does a Standard Window Replacement Cost in Dallas?
A standard 36 x 60-inch double-hung vinyl replacement in Dallas runs $550 to $850 installed. Add low-E glass and argon and you’re at $650 to $950. That number includes labor, materials, trim, flashing, insulation, and haul-away. A full-frame replacement of the same size runs $700 to $1,100. Every quote from Meridian Windows and Doors Dallas puts these numbers on paper before work begins, so you know the full cost going in.
How Long Does New Window Installation Take in Dallas?
A crew of two can install 8 to 12 standard-size vinyl replacement windows in one full day. Full-frame replacements with rot repair run slower, typically 3 to 5 windows per day. A whole-home job of 15 windows usually takes 2 to 3 working days. Dallas weather rarely slows a window project, though extreme heat in July and August may shift start times earlier in the morning for the crew’s safety and for proper foam expansion. We’ll give you a specific timeline on the written estimate before any work starts.
Does Meridian Windows and Doors Dallas Offer Free Estimates?
Yes. Every estimate from Meridian Windows and Doors Dallas is free. We visit your home, measure the openings, assess frame condition, discuss glass and material options from our eight manufacturer lines, and hand you a written price. The quote includes the full scope: materials, labor, disposal, permit if required, and any relevant site conditions. The number is the number. Call (325) 309-2639 to schedule yours.
Do I Need a Permit to Replace Windows in Dallas?
Same-size, same-opening window replacements in Dallas generally don’t require a building permit, provided the structural opening isn’t modified. Any project that enlarges, alters, or adds a new opening does require a permit, and window work in Dallas Landmark Districts (like Swiss Avenue or Munger Place) requires review regardless of scope. Permit fees run $50 to $200 for a standard residential project. Meridian Windows and Doors Dallas handles all permit paperwork on jobs that need it, and it’s itemized on the written estimate.
What Happens If a Window Fails After Installation?
With Meridian Windows and Doors Dallas, it gets fixed. Every installation carries our 365-Day Done Right Promise: a written guarantee covering the work for a full year. If a seal fails, a lock jams, a crank binds, or the trim shifts, call us and we’ll return at no charge. That includes a second free visit. We’ve been operating to The Garrison Standard since 2009, and the guarantee is part of every written bid. No fine print, no labor exclusions.
FAQs – New Window Installation Cost in Dallas
How much does new window installation cost in Dallas in 2026?
New window installation in Dallas runs $450 to $1,400 per window installed. A typical mid-range double-hung vinyl replacement with low-E glass sits at $600 to $900 per window. A full-home replacement of 10 to 15 windows totals $6,000 to $18,000. Call (325) 309-2639 for a written, itemized estimate specific to your home, free of charge.
Is it cheaper to repair or replace a window in Dallas?
Repair costs $100 to $350 per pane or hardware fix. Replacement costs $450 to $1,400 per window. If the frame is sound and the window is under 15 years old, repair is the cheaper call. If the frame is rotted, the sashes don’t operate, or the glass is failing on windows older than 20 years, replacement becomes the better investment. We’ll inspect and give you both numbers in writing; no pressure either way.
How much does labor cost to install a window in Dallas?
Labor for window installation in Dallas runs $150 to $350 per window for a standard retrofit. Full-frame replacement labor runs $250 to $600 per window depending on access, second-story work, and frame condition. Meridian does not charge separately for haul-away, exterior caulking, or interior trim on standard installs; those are included.
What is the cheapest window type to install in Dallas?
Single-hung vinyl windows are the least expensive at $400 to $800 per window installed, depending on size and glass. Sliding windows and fixed picture windows are close behind at $400 to $900. They work fine for rental properties or budget renovations. For most Dallas homeowners, a double-hung vinyl at $500 to $1,100 offers the best balance of cost and function.
Can Meridian Windows and Doors Dallas install windows this week?
We answer the phone 24/7 and can usually get an estimator to your home within a few days. Standard window replacements in Dallas often start 1 to 2 weeks after the bid is accepted. Call (325) 309-2639 and a live person will give you the current schedule for your area.
How We Work: The Price on Paper, Every Time
Meridian Windows and Doors Dallas runs on discipline. You call. We answer, live, at any hour. We schedule a free estimate. We measure the openings, check the frames, and talk through the options across eight manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Then we write the price down. Materials, labor, disposal, permit if required. The number does not change at the door.
A meridian is a fixed line you measure everything against. That is what the name means and how we run every install. If the work fails within 365 days, it gets made right at no charge. Every technician who steps onto your property is background-checked and uniformed. You’ll know exactly who is walking through your door.
If you’re replacing windows in Dallas, Plano, Richardson, Garland, Mesquite, or anywhere in Dallas County, start with a call. (325) 309-2639. Free estimate, written price, no pressure.
Learn more about our process on our New Window Installation in Dallas page or return to the home page to see everything we do.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Dallas and surrounding communities since 2009. Mr. Vance has spent 16 years in residential window installation and replacement across North Texas and leads every estimate and install himself.
Pricing reflects the Dallas market as of 2026. Meridian Windows and Doors Dallas offers free estimates – call (325) 309-2639.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Meridian Windows and Doors Dallas Services
What Neighbors Say About Meridian Windows and Doors Dallas
What Our Customers Say
"Front door and sidelights replaced. Weatherstripped and foamed properly. No more drafts."
- Brett A."Noise from the street dropped noticeably with the laminated glass."
- Harvey D."Installed six replacement windows in a day and a half. Crew was punctual, disciplined, and clean. The owner is a veteran and the standards show."
- Phil R.