New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Window Installation for Dallas Homeowners
A properly installed window in Dallas does more than open and close. It keeps attic heat from bleeding into the living room in August, holds the heat in during February’s ice storms, and seals out the dust that rolls through North Texas every spring. Meridian Windows and Doors Dallas has installed and replaced windows across the metroplex since 2009, working to The Garrison Standard on every job: the price goes on paper before work starts, and every installation is covered in writing for 365 days. If it fails within that year, we come back at no charge. Call (325) 309-2639 for a free estimate.
Most single window replacements in Dallas run $450 to $1,200 installed, depending on the frame material, glass package, and whether the opening needs repair. Full-house vinyl replacement jobs typically fall between $8,000 and $22,000. We’ll give you the exact number before you commit to anything.
Casement Windows
Casement windows are hinged on one side and swing outward with a crank, sealing tight against the frame when closed. They’re a strong choice for Dallas homes where the summer wind blows hard and the winter air creeps in. Meridian Windows and Doors Dallas installs Casement Windows in standard and custom sizes, with pricing that typically runs $550 to $1,400 per window depending on the glass package and whether we’re replacing an existing casement or converting from a different style.
Crank mechanism replacement
The crank is the first part to wear out on a casement window, especially in humid Dallas summers when metal components expand and contract. We stock replacement hardware for most major manufacturers and can restore a stiff or stripped crank without replacing the whole unit.
Seal and hinge correction
Dallas wind loads test casement hinges and seals constantly. When a casement doesn’t seat flush, you lose the tight seal that makes the style worth having in the first place. Our techs realign hinges and replace worn weatherstripping so the window closes like it did new.
Double Hung Windows
Double hung windows have two operable sashes that slide vertically, so you can open the top, the bottom, or both. That flexibility matters in Dallas, where cross-ventilation on a mild evening can push hot air out faster. Meridian Windows and Doors Dallas installs and repairs double hung windows throughout the metroplex, with replacement typically running $400 to $900 per window depending on frame material and glass.
Balance and spring correction
When a double hung sash won’t stay up, the balance system has failed. That’s a common issue in older Dallas homes with original wood windows. We replace the balances and re-trim the sashes so both sides operate smoothly.
Energy glass upgrades
Dallas heat punishes single-pane double hungs. Swapping in low-E glass (a thin coating that reflects heat while letting light through) can cut the heat gain through a south-facing bedroom window noticeably. We spec the right glass for the orientation of each opening.
Vinyl Windows
Vinyl windows are built from extruded PVC frames that never need painting and resist the moisture swings that crack wood in Dallas. For most homeowners, vinyl is the practical choice: good insulation value, low upkeep, and a price that makes whole-house replacement feasible. Meridian Windows and Doors Dallas installs vinyl windows from proven manufacturers, with single units typically running $350 to $850 installed and full-home projects from $8,000 to $22,000.
Warp concerns addressed
Cheap vinyl frames warp under Dallas sun. That’s why we’re selective about the lines we stock. The vinyl products we carry are engineered for high-heat climates, not just budget price points.
Whole-house vinyl replacement
If you’re replacing ten or more windows, vinyl keeps the total cost manageable without sacrificing performance. We’ll measure every opening, spec the right glass package, and put the full price in writing before any materials are ordered.
Picture Window
A picture window is a fixed pane of glass that doesn’t open, built to frame a view and flood a room with daylight. Dallas homeowners often put one in a living room or dining room facing the backyard. Since there’s no sash hardware to fail, a picture window’s job comes down to the glass and the frame. Meridian Windows and Doors Dallas installs picture windows from $600 to $2,500 depending on size and glass package.
Large-format glass handling
A picture window spanning six feet or more requires careful lifting and shimming to prevent stress cracks. Our crew handles oversized panes with suction cups and two-person lifts, then seats the frame level in the rough opening before sealing.
Heat gain and UV control
Dallas sun through a picture window heats a room fast and fades furniture. We spec low-E coatings and, where it makes sense, spectrally selective glass that cuts UV without dimming the view.
Bay Window Installation
Bay & Bow Windows add floor space, light, and architectural character to a Dallas living room or breakfast nook. A bay projects outward from the wall, built from a fixed center picture window flanked by two operable windows, usually casements or double hungs. Meridian Windows and Doors Dallas handles full bay window installation from framing to trim, with most projects running $2,500 to $7,000 depending on size, roof requirements, and glass package.
Structural framing work
A bay window carries real structural load in a Dallas home. The header, cantilevered supports, and roof (or interior ceiling treatment) all have to be built to code. We pull the permit and build it right the first time.
Leak points at the base
Bay windows fail most often where the projection meets the house wall. We flash the underside and side walls thoroughly, then seal every joint before the trim goes on. A bay window that leaks ruins drywall fast.
Window Contractor
A window contractor is the licensed professional who measures, orders, installs, and guarantees your window work from start to finish. Meridian Windows and Doors Dallas operates as a full-service window contractor in the Dallas area, handling everything from single-window swaps to whole-house installs. Our pricing is written down before work starts, and every job is covered by the 365-Day Done Right Promise. Most replacement projects run $400 to $1,400 per window depending on style and glass.
What The Garrison Code means on site
The Garrison Code is simple: show up when promised, price honestly, protect the work area, clean up completely, and stand behind the finished job in writing. Our crew follows that standard on every window installation in Dallas, from first measurement to final walkthrough.
Pricing with no door pressure
We don’t start high and negotiate down at your kitchen table. The quote we deliver is the price you pay, line by line. If a complication comes up mid-job, we explain it before touching it, and we never surprise you with a change order at the end.
Window Installers
Window installers are the crew who take a window from box to finished opening: removing the old unit, prepping the rough opening, setting the new window level and square, insulating around the frame, and trimming it out. Meridian Windows and Doors Dallas sends background-checked, uniformed installers to every Dallas job. You’ll know exactly who is walking through your door. Install labor typically runs $150 to $350 per window, separate from product cost, though our written quotes include everything.
Background-checked and uniformed
Every installer who shows up at your Dallas home has passed a background check and wears a Meridian uniform. You won’t wonder who’s in your house. That discipline is part of The Garrison Standard and it’s been that way since 2009.
Insulation and air sealing technique
The best window in the world performs badly if the install crew skips the insulation around the frame. We use low-expansion foam around every opening and seal the exterior with the right flashing tape. That’s the difference between a window that’s installed and a window that’s installed correctly.
Brands We Service
We’re authorized to install and replace products from ES Windows and ECO Window Systems, two manufacturers that build windows engineered for high-heat, high-humidity climates like Dallas. ES Windows specializes in impact-rated aluminum frames that hold up to North Texas storms. ECO Window Systems builds energy-efficient vinyl and aluminum lines that deliver strong thermal performance at a measured price point.
We also work on Mr-Glass and Therma-Tru units regularly. Mr-Glass products are common in Dallas apartment and condo build-outs where budget and durability both matter. Therma-Tru is a standard for entry systems, and when a patio or front door replacement ties into window work, we can handle both in one project. Whether you have one of these brands or any other make, we can help.
Signs You Need a Pro Right Now
- Condensation between the panes. When moisture shows up inside a double-pane window, the seal has failed and the insulating gas has escaped. The window no longer insulates the way it should, and Dallas humidity makes it worse over time.
- Sashes that stick or won’t stay open. A window that fights you is telling you the balance system or track is failing. Forced operation bends hardware and can crack the frame, turning a simple repair into a full replacement.
- Visible daylight around the frame. If you can see light at the edges of a closed window, air is moving through. That’s a direct loss of cooling in a Dallas summer and a path for moisture in the winter.
- Drafts you can feel from three feet away. Walk past a closed window on a windy day. If you feel a temperature change, the weatherstripping or the seal around the frame has failed. That’s money leaving your HVAC system every month.
- Water stains or soft drywall below the sill. Water getting in around a window frame rots the structure quietly. By the time you see a stain, the leak has been active for a while. Don’t wait to address it.
Our Process, Step by Step
- 1
Measurement and assessment. We measure every opening precisely, check the existing frame for rot or water damage, and note the orientation of each window relative to Dallas sun. The quote comes from real measurements, not rough guesses.
- 2
Written quote and product selection. You get a line-item price on paper before you agree to anything. We explain the glass package, frame material, and what’s included in labor. Nothing gets ordered until you approve the number.
- 3
Permit and scheduling. If the job requires a permit, we pull it. You get a firm install date and a phone number that reaches a live person, day or night, if anything changes.
- 4
Installation day. The crew arrives in uniform, protects the work area with drop cloths, removes the old window carefully, preps the opening, and sets the new unit level and square. Foam insulation, flashing, exterior seal, interior trim, done.
- 5
Walkthrough and warranty. We walk the job with you, show you the work, and make sure you’re satisfied before we leave. Every installation is covered by the 365-Day Done Right Promise in writing. If anything fails within the year, we return at no charge.
How Much Does Window Installation Cost in Dallas?
A typical single window replacement in Dallas runs $450 to $1,200 installed. Double hung vinyl units tend to sit at the lower end of that range, while Awning & Hopper Windows, casement windows and oversized picture windows push toward the top. Bay window installation is a bigger project, generally $2,500 to $7,000 with framing, roof work, and trim included. Whole-house vinyl replacement across a three-bedroom Dallas home typically lands between $8,000 and $22,000.
What moves the price: frame material, glass package (low-E and impact ratings cost more but pay back in Dallas’s climate), window size, access difficulty on upper floors, and whether the rough opening needs carpentry repair. The biggest cost surprise comes from water damage hiding behind old frames. That’s why our quotes include a line for any anticipated repair work, and we explain any new finding before we touch it.
How to avoid overpaying: get a written, line-item quote and compare it against another written quote. Ask whether the price includes trim, haul-away, and insulation. Ask about warranty terms in writing. A free estimate from Meridian Windows and Doors Dallas includes all of this, with the price on paper and no obligation. Call (325) 309-2639 to schedule yours.
Our Service Area Near Dallas
We serve Dallas and the surrounding suburbs, including Window Installation in Garland, Window Installation in Cedar Hill, Grand Prairie, DeSoto, Sachse, Murphy, Rowlett, Glenn Heights, North Dallas, Seagoville, and Uptown Dallas. Most of our customers schedule an estimate within a few days, and install scheduling depends on product lead time. If you’re anywhere in the Dallas metroplex, call and we’ll get you on the calendar. See our home page for the full picture of what we do across the area.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Window Installation in Dallas
Window installation is the process of removing an old or failed window, preparing the rough opening, and setting a new window level, square, insulated, and sealed. It includes interior trim work and exterior flashing to keep water out. In Dallas, proper installation matters as much as the window itself because heat, humidity, and wind all test the seal.
A standard single window replacement takes 2 to 4 hours from removal to finish trim. A whole-house project of ten or more windows typically runs 2 to 3 days. Bay window installation takes longer due to framing and roof work, often 2 to 3 days for a single bay. We’ll give you a firm timeline in writing before scheduling.
Single window replacements in Dallas run $450 to $1,200 installed, depending on style, glass, and frame material. Full vinyl replacements across a house typically range from $8,000 to $22,000, and bay window installation runs $2,500 to $7,000. Call (325) 309-2639 for an exact written quote, free of charge.
Yes. We’re authorized to install and replace ES Windows and ECO Window Systems products, and we work on Mr-Glass and Therma-Tru units regularly. If you have a different brand, we can still help. Call (325) 309-2639 and tell us what you have.
If a window is broken and your home is exposed to weather or security risk, call us any time at (325) 309-2639. A live person answers 24/7, and we’ll get a crew scheduled to secure the opening. After-hours availability applies to genuine emergencies, not routine replacements.
Every installation is covered by the 365-Day Done Right Promise in writing. If the window fails within that year due to our workmanship, we return and make it right at no charge. We also include a free second visit if any repair is needed within the guarantee period. No fine print about labor exclusions.
Clear about three feet of space around each window, inside and out. Move furniture, wall hangings, and window treatments out of the work area. Secure pets in another room during the install. We’ll cover the floor and clean up thoroughly when the job is done. Call (325) 309-2639 if you have questions about prep.
Schedule Your Window Installation Service in Dallas Today
You’ll get a written price before any work starts, a crew that shows up on time and in uniform, and a written guarantee on every install. Call (325) 309-2639 to schedule your free estimate. A live person answers, 24/7.
Written by Elliot Vance, Owner at Meridian Windows and Doors Dallas, serving Dallas since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Dallas
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.